To Next Page
C
Carolyn YangSep 7, 2025
Why is my Kenwood DDX3028 displaying 'NO Voice Device'?
- MmichaelhallSep 8, 2025
The connected mobile phone does not have the voice recognition system, that's why Kenwood Car Receiver displays 'NO Voice Device'.
Why is my Kenwood DDX3028 displaying 'NO Voice Device'?
The connected mobile phone does not have the voice recognition system, that's why Kenwood Car Receiver displays 'NO Voice Device'.
Why is my Kenwood DDX3028 Car Receiver showing 'Authorization Error'?
Check whether the connected iPod/iPhone is compatible with this Kenwood Car Receiver.
Why is my Kenwood Car Receiver showing parking off?
No playback picture is shown on Kenwood Car Receiver when the parking brake is not engaged.
Why is my Kenwood DDX3028 Car Receiver not displaying a picture?
Turn on the screen of your Kenwood Car Receiver.
Why is there no sound coming from the speakers of my Kenwood Car Receiver?
Ensure the volume is at an audible level and check all speaker wire connections.
Why is my Kenwood DDX3028 showing no signal?
If your Kenwood Car Receiver is showing 'No Signal', start playback on the external component connected to the AV-IN input. Check the cords and connections. The signal input may be too weak.
How to fix miswiring DC offset error on Kenwood Car Receiver?
If you are getting a Miswiring DC Offset Error on your Kenwood Car Receiver, it means a speaker cord has shorted or is in contact with the car chassis. Wire or insulate the speaker cord as needed, then reset the unit.
What to do if my Kenwood DDX3028 Car Receiver displays 'USB Device Error'?
If your Kenwood Car Receiver shows a 'USB Device Error', try turning the unit off and then on again. If the problem persists, try connecting a different USB device.
How to adjust Echo or noise that occurs on Kenwood Car Receiver?
Adjust the microphone unit position.
Why is the sound interrupted while using a Bluetooth audio player on my Kenwood DDX3028?
Reduce the distance between the unit and the Bluetooth audio player. Disconnect the device connected for Bluetooth phone. Turn off, then turn on the unit. When the sound is not yet restored connect the player again.
General| Bluetooth | Yes |
|---|---|
| DVD Player | Yes |
| Navigation | No |
| Rear View Camera Input | Yes |
| Preamp Voltage | 2.5V |
| AM/FM Tuner | Yes |
| CD Playback | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| Resolution | 800 x 480 |
| USB Port | Yes |
| Audio Formats Supported | MP3, WMA, AAC |
| Video Formats Supported | MPEG1, MPEG2, DivX |
| Power Output | 50 Watts x 4 Channels |
| Preamp Outputs | 3 Pairs (Front, Rear, Subwoofer) |
| AUX Input | Yes |
| iPod Compatibility | Yes |
| iPhone Compatibility | Yes |
| Steering Wheel Control Compatibility | Yes |
