Why is there static noise while listening to the radio on my Kenwood Car Receiver?
If you are experiencing static noise while listening to the radio with your Kenwood Car Receiver, make sure the aerial is firmly connected.
Why is my Kenwood Car Receiver remote controller not working?
If the remote controller for your Kenwood Car Receiver is not working, try replacing the battery.
How to stop the sound from skipping on my Kenwood Car Receiver with Bluetooth?
If the sound is being interrupted or skipped while using a Bluetooth audio player with your Kenwood Car Receiver: 1. Reduce the distance between the unit and the Bluetooth audio player. 2. Disconnect any device connected for Bluetooth phone use. 3. Turn the unit off and then on again. 4. If the sound is still not restored, try connecting the player again.
Why won't my Bluetooth device detect my Kenwood Car Receiver?
If your Bluetooth device is not detecting the Kenwood Car Receiver: * Check whether the Bluetooth adapter (KS-UBT1) is inserted correctly. * Try searching from the Bluetooth device again.
How to fix Kenwood Car Receiver when no sound comes out of speakers?
If no sound is coming from the speakers of your Kenwood Car Receiver, first, adjust the volume to the desired level. If that doesn't work, check the cords and connections to ensure they are properly connected.
What does 'Miswiring DC Offset Error' mean on my Kenwood Car Receiver?
The “Miswiring DC Offset Error” or “Warning DC Offset Error” on your Kenwood Car Receiver indicates that a speaker cord has shorted or is in contact with the car chassis. To resolve this, wire or insulate the speaker cord appropriately and then reset the unit.
Why is the phone sound quality poor on my Kenwood Car Receiver?
If the phone sound quality is poor on your Kenwood Car Receiver, try reducing the distance between the unit and the Bluetooth mobile phone. Alternatively, move the car to a location with better signal reception.
What does “USB Device Error” mean on my Kenwood Car Receiver?
The “USB Device Error” on your Kenwood Car Receiver indicates that the USB power voltage is abnormal. Try turning the unit off and then on again. If the issue persists, connect another USB device.
Why does my Kenwood Car Receiver say 'Parking off'?
When your Kenwood Car Receiver displays 'Parking off', it means no playback picture is shown because the parking brake is not engaged.
How to fix 'No Signal' error on Kenwood Car Receiver?
If your Kenwood Car Receiver displays a “No Signal” error: * Start the playback on the external component connected to AV-IN input terminal. * Check the cords and connections. * The signal input may be too weak.
Crucial safety advice for operation, installation, and monitor care to prevent accidents.
Guide to understanding manual conventions, symbols, and abbreviations for clear operation.
Essential first-time setup steps including language selection and panel customization.
Detailed description of each button, indicator, and their functions on the unit.
How to manage power, screen, volume, and use sound attenuation.
How to choose audio/video sources like DISC, USB, iPod, TUNER, AV-IN, and Bluetooth.
Step-by-step guide for disc insertion, ejection, and panel management.
Setup and procedures for displaying the rear view camera feed.
General guidance and precautions for connecting and using Bluetooth devices.
Options for audio, display, input, system, security, and language settings.
Managing settings, locking configurations, and calibrating the touch panel.
Solutions for specific error messages displayed by the unit.
Guidelines for cleaning the unit, handling discs, and preventing damage.
Diagram and guide for connecting all necessary wires to the unit.
Detailed specifications for monitor, DVD, USB, Bluetooth, and tuner sections.
To Next Page
General
