C
cookrobertSep 9, 2025
Why does playback not start on my Kenwood DDX6023BT?
- SSara RodriguezSep 9, 2025
Playback does not start because the format of files is not supported by the unit.
To Next PageTo Next PageWhy does playback not start on my Kenwood DDX6023BT?
Playback does not start because the format of files is not supported by the unit.
What to do if Kenwood Car Receiver USB Device Error?
If your Kenwood Car Receiver displays a “USB Device Error”, it means the USB power voltage is abnormal. Try turning the unit off and then on again. If the issue persists, connect another USB device.
Why is there no sound from my Kenwood Car Receiver speakers?
If no sound is coming from the speakers of your Kenwood Car Receiver, first, adjust the volume to an optimum level. If that doesn't work, check the cords and connections to ensure they are properly connected.
What does 'Authorization Error' mean on my Kenwood DDX6023BT?
The “Authorization Error” on your Kenwood Car Receiver indicates that the connected iPod/iPhone may not be compatible with the unit. Check the compatibility of your device.
Why is my Kenwood DDX6023BT showing 'No Signal'?
If your Kenwood Car Receiver displays a “No Signal” message: • Start playback on the external component connected to AV-IN1 or iPod/AV-IN2 input terminal. • Check the cords and connections. • The signal input may be too weak.
Why is there no picture on the external monitor connected to my Kenwood DDX6023BT Car Receiver?
If no picture appears on the external monitor connected to your Kenwood Car Receiver: • Connect the video cord correctly. • Select the correct input on the external monitor.
Why can't disc be played back on Kenwood Car Receiver?
To resolve disc playback issues on your Kenwood Car Receiver: • Record the tracks using a compliant application on the appropriate discs. • Add appropriate extension codes to the file names.
Why won't my Kenwood DDX6023BT copy the phonebook?
The unit does not respond when you try to copy the phonebook to the unit because you may have tried to copy the same entries (as stored) to the unit.
Why won't my iPod/iPhone turn on with Kenwood DDX6023BT Car Receiver?
If your iPod/iPhone does not turn on or work with the Kenwood Car Receiver: • Check the connecting cable and its connection. • Update the firmware version. • Charge the battery. • Check whether the iPod/iPhone control mode is correctly selected. • Reset the iPod/iPhone.
Why is there no sound from my Kenwood Car Receiver using iPod/iPhone?
If no sound is coming from the speakers of your Kenwood Car Receiver while using an iPod/iPhone: • Disconnect the iPod/iPhone, then connect it again. • Select another source and then reselect “iPod.”
Resets the unit to factory settings.
Steps to set a four-digit security code.
Lists available sources like NAV, DISC, iPod, USB, etc.
Details on playing USB devices and capacity.
Steps for connecting iPod/iPhone.
Steps to connect and use MirrorLink.
Switches bands, selects stations, and changes seek modes.
Adjusting sound equalization and preset modes.
Adjusting brightness, contrast, color, tint, sharpness.
Steps to activate the rear view camera.
Steps to pair and register a device.
Receiving, ending calls, switching modes, and notifications.
Adjusting echo cancellation and making calls via various methods.
Searching by initial, selecting numbers, and viewing details.
Basic controls, call handling, screen switching, aspect ratio, panel angle.
Selecting tracks, files, and using direct search.
Switches bands, selects stations, seek modes, and direct tuning.
Selects music/video/files/folders and controls playback.
Error messages and remedies for general issues.
Error messages and remedies for Bluetooth issues.
Symptoms like no sound, disc errors, file format issues.
Issues with AV input and file playback.
Troubleshooting iPod/iPhone connection and playback problems.
Troubleshooting USB connection and playback issues.
Steps for installing the unit.
General| MP3 playback | Yes |
|---|---|
| Audio decoders | Dolby Digital, DTS |
| Playback disc formats | CD audio, CD video |
| Audio formats supported | AAC, LPCM, MP3, WAV, WMA |
| Image formats supported | JPG |
| Video formats supported | DIVX, MPEG1, MPEG2 |
| Tuner type | K3I |
| FM band range | 87.5 - 108 MHz |
| LW band range | 153 - 279 kHz |
| Supported radio bands | AM, FM, LW, MW |
| Preset stations quantity | 24 |
| Display type | TFT |
| Display diagonal | 7 \ |
| Display resolution | 800 x 480 pixels |
| Number of OSD languages | 18 |
| Display number of colors | 65536 colors |
| On Screen Display (OSD) languages | ARA, CHI (SIMPL), CHI (TR), DEU, DUT, ENG, ESP, FRE, GRE, HEB, KOR, POR, RUS, THA, TUR |
| USB version | 2.0 |
| Bluetooth range | 10 m |
| Bluetooth version | 2.0+EDR |
| Bluetooth profiles | A2DP, AVRCP, HFP, OPP, PBAP |
| Line outputs (RCA) | 3 |
| USB ports quantity | 1 |
| Apple docking compatibility | iPhone, iPhone 3G, iPhone 3GS, iPhone 4, iPod, iPod Classic 1, iPod Classic 2, iPod Classic 3, iPod Classic 4, iPod Classic 5, iPod Classic 6 |
| DIN size | 2 DIN |
| Output power | 120 W |
| Product color | Black |
| Disc types supported | CD, CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW |
| Analog signal format system | NTSC, PAL |
| Signal-to-Noise Ratio (SNR) | 65 dB |
| File format system | FAT 16/32 |
| Remote control type | RC-DV340 |
| Key illumination color | Multi |
| Peak Music Power Output (PMPO) | 200 W |
| Storage temperature (T-T) | -20 - 85 °C |
| Operating temperature (T-T) | -10 - 60 °C |
Weight and Dimensions| Weight | 2500 g |
|---|---|
| Dimensions (WxDxH) | 182 x 160 x 111 mm |
