S
Shane MatthewsSep 18, 2025
Why Kenwood DDX6033BT Car Video System says “Cannot Skip”?
- GGary GarrisonSep 18, 2025
If your Kenwood Car Video System displays “Cannot Skip”, it means that no more songs can be skipped.
To Next PageTo Next PageWhy Kenwood DDX6033BT Car Video System says “Cannot Skip”?
If your Kenwood Car Video System displays “Cannot Skip”, it means that no more songs can be skipped.
What to do if Kenwood DDX6033BT Car Video System shows “Miswiring DC Offset Error”?
If your Kenwood Car Video System displays the message “Miswiring DC Offset Error” or “Warning DC Offset Error”, it means a speaker cord has shorted or is in contact with the car chassis. You should wire or insulate the speaker cord appropriately and then reset the unit.
Why does my Kenwood Car Video System say “USB Device Error”?
If your Kenwood Car Video System displays “USB Device Error”, it indicates that the USB power voltage is abnormal. Try turning the unit off and then on again. If that doesn’t work, try connecting a different USB device.
How to fix static noise on Kenwood DDX6033BT Car Video System radio?
If you're experiencing static noise while listening to the radio on your Kenwood Car Video System, make sure the antenna is firmly connected.
Why Kenwood DDX6033BT Car Video System says “Rating Failed”?
If your Kenwood Car Video System displays “Rating Failed”, it means that thumb-up/down is prohibited.
What does “No Active Station” mean on Kenwood DDX6033BT Car Video System?
If your Kenwood Car Video System displays “No Active Station”, it means that no station is being played.
Why Kenwood DDX6033BT says “Cannot create a station”?
If your Kenwood Car Video System displays “Cannot create a station”, it means that the registration of the stations to the Station List is full. The unit has failed to bookmark, so try the operation again.
Why won't my Kenwood DDX6033BT start playback?
If playback doesn't start on your Kenwood Car Video System, it is likely that the format of the files is not supported by the unit.
Why can't I control the audio player with my Kenwood Car Video System?
If the connected audio player cannot be controlled with your Kenwood Car Video System, verify that the connected audio player supports AVRCP (Audio Video Remote Control Profile).
Why is there no picture on my Kenwood DDX6033BT?
If no picture is displayed on the screen of your Kenwood Car Video System, turn on the screen.
Important safety warnings and cautions regarding operation and the monitor display.
Procedure to reset the unit to factory default settings, excluding Bluetooth devices.
Steps for initial setup of the unit, including language and input source selection.
Steps to register a four-digit security code for theft protection.
Procedure to activate the security function, indicated by a flashing monitor light when ignition is off.
List of available sources and how to select them for playback.
Steps to rearrange and select which items appear on the Top Menu.
Guidance on inserting, playing, and ejecting discs, including monitor panel closure.
Explanation of playback modes, track selection, and search functions for different media.
Information on supported file types, capacity, and how to play USB content.
Important warnings and precautions when using USB devices with the unit.
Steps for connecting iPod/iPhone, including required cables and initial setup.
Configuring the AV Input setting for iPod/iPhone connection types.
Connecting the smartphone adapter and understanding the MirrorLink interface.
Using Auto Memory (AME) to store the strongest signals automatically.
Steps for manually tuning and storing stations to preset numbers.
Options for connecting Android/BlackBerry via Bluetooth or iPhone/iPod via USB.
How to choose between Station List and Genre List to select music.
How to display the navigation screen and its limitations.
How to select preset sound modes and adjust equalizer levels for different bands.
Steps to activate the rear view camera display on the unit.
Assigning unit functions to the steering remote controller buttons.
Information on connecting and communicating with Bluetooth devices.
Procedure for pairing a new Bluetooth device using SSP or PIN code.
How to receive, reject, or auto-answer incoming calls.
General overview of the remote controller, battery installation, and safety precautions.
Remedies for general error messages related to signal, wiring, and device connection.
Solutions for Bluetooth-related error messages and connection failures.
Common Pandora error messages and their corresponding remedies.
Solutions for problems with speakers, screen, remote control, tuner, discs, and AV inputs.
Solutions for problems like no sound, device not working, distorted sound, and sync issues.
Troubleshooting for USB connection problems, reading errors, and sound interruptions.
Solutions for poor phone sound, audio interruptions, pairing failures, and echo.
Step-by-step guide for safely installing the unit in the vehicle.
Details on the adapter's features, specifications, and cautions for use.
Important safety warnings and cautions regarding operation and the monitor display.
Procedure to reset the unit to factory default settings, excluding Bluetooth devices.
Steps for initial setup of the unit, including language and input source selection.
Steps to register a four-digit security code for theft protection.
Procedure to activate the security function, indicated by a flashing monitor light when ignition is off.
List of available sources and how to select them for playback.
Steps to rearrange and select which items appear on the Top Menu.
Guidance on inserting, playing, and ejecting discs, including monitor panel closure.
Explanation of playback modes, track selection, and search functions for different media.
Information on supported file types, capacity, and how to play USB content.
Important warnings and precautions when using USB devices with the unit.
Steps for connecting iPod/iPhone, including required cables and initial setup.
Configuring the AV Input setting for iPod/iPhone connection types.
Connecting the smartphone adapter and understanding the MirrorLink interface.
Using Auto Memory (AME) to store the strongest signals automatically.
Steps for manually tuning and storing stations to preset numbers.
Options for connecting Android/BlackBerry via Bluetooth or iPhone/iPod via USB.
How to choose between Station List and Genre List to select music.
How to display the navigation screen and its limitations.
How to select preset sound modes and adjust equalizer levels for different bands.
Steps to activate the rear view camera display on the unit.
Assigning unit functions to the steering remote controller buttons.
Information on connecting and communicating with Bluetooth devices.
Procedure for pairing a new Bluetooth device using SSP or PIN code.
How to receive, reject, or auto-answer incoming calls.
General overview of the remote controller, battery installation, and safety precautions.
Remedies for general error messages related to signal, wiring, and device connection.
Solutions for Bluetooth-related error messages and connection failures.
Common Pandora error messages and their corresponding remedies.
Solutions for problems with speakers, screen, remote control, tuner, discs, and AV inputs.
Solutions for problems like no sound, device not working, distorted sound, and sync issues.
Troubleshooting for USB connection problems, reading errors, and sound interruptions.
Solutions for poor phone sound, audio interruptions, pairing failures, and echo.
Step-by-step guide for safely installing the unit in the vehicle.
Details on the adapter's features, specifications, and cautions for use.
General| Resolution | 800 x 480 pixels |
|---|---|
| Touchscreen | Yes |
| Bluetooth | Yes |
| USB Ports | 1 |
| AUX Input | Yes |
| DVD Player | Yes |
| CD Playback | Yes |
| AM/FM Tuner | Yes |
| Rear View Camera Input | Yes |
| Audio Formats Supported | MP3, WMA, AAC |
| Preamp Outputs | 3 (front, rear, subwoofer) |
| Built-in Amplifier | Yes |
| Maximum Power | 50W x 4 Channels |
| Video Formats Supported | MPEG-1, MPEG-2 |
| Compatibility | iPhone, Android |
