This product uses Lead Free solder.
This product complies with the
RoHS directive for the European market.
© 2008-4 PRINTED IN JA PAN
B53-0634-00
(
N
)
429
DDX7032/7032M/712
DNX7120/7220/7320
SERVICE MANUAL
MONITOR WITH DVD RECEIVER / NAVIGATION SYSTEM
NAVIGATION SYSTEM
DNX7120
ILLUSTRATION IS
RC-DV340
DC cord *
(E30-6825-05)
DC cord *
(E30-6824-05)
Screw set
*
(N99-1779-15)
Lever
(D10-4589-04) x2
Remote controller assy
(A70-2082-15) RC-DV330 :DNX
(A70-2083-15) RC-DV340 :DDX
Mounting hardware assy
(J22-0657-03)
Escutcheon
*
(B07-3172-12)
Size AAA battery
Not supplied
Cord with plug(relay)
(E30-6786-05)
Escutcheon
(B07-3224-01)
Illustrations is DNX7120
ANT module(GPS-ANT)*
(W02-5305-05)
Mounting hardware*
(J21-9867-04)
Adhesive double-
coated tape
*
(H30-0595-04)
(5m)
(1m)
PRK: (2m)
REV: (5m)
The IC106 in the Digital I/O unit (X88-2030-11) are not replaceable components. When this
IC are defective, replace the whole Digital I/O unit (X88-2030-11).
The IC5,9,21 and IC60 in the DVD unit (X37-1120-06) are not replaceable components.
When these ICs are defective, replace the whole DVD mechanism assembly (X92-6180-01).
You cannot replace only the board.
Cord with pinplug(AV)
(E30-6792-05)
Cord with pinplug(PRE)
(E30-6794-05)
Cord with plug(ipod)*
(E30-6785-05)
Clamper *
(J11-0660-05)
(1m)
* Depends on the models. Refer to the parts list.
To Next Page
