Kenwood DMX7520DABS User Manual

Setup
64
■ [TV Tuner Control]
Sets when connecting the TV tuner to AV-IN
input terminal.
To use this function, it is necessary to set
"AV-IN" to "None" in [Camera Assignment
Settings]. (P.56)
[ON]: Set to ON when connecting the 3rd
party TV tuner. AV-IN Name is set to TV. If
you connect the TV tuner made by DOS
and watch TV, you can perform some
simple operations by touching the screen
of this unit.
[OFF] (Default): Set to OFF when not
connecting the 3rd party TV tuner.
■ [AV-OUT]
You can select an AV source to be output
from the AV OUTPUT port.
OFF, AV-IN, USB or iPod
• You cannot select AV-IN if the AV-IN input
terminal is used for camera.
• You cannot select iPod if it is connected via
Bluetooth.
• If you select USB, iPod, Bluetooth audio,
Radio or Digital Radio as the main source,
you cannot select USB or iPod as the AV
output source.
• If you select Wireless Mirroring, Apple
CarPlay or Android Auto as the main
source, you cannot select USB or iPod as
the AV output source.
■ [Driving Position]
Select the driving position (left or right).
“Left” (Default)/“Right”
■ [Wi-Fi SETUP] (DMX8020DABS)
You can change the device name and display
the device address, password. See Change
the device name (P.64).
■ [Reset Android Auto Wireless
Connection] (DMX8020DABS)
You can change the password for wireless
Android Auto.
The system of the unit is rebooted after
selecting [YES].
Ñ Change the device name
1
Touch [Wi-Fi SETUP] on the AV screen.
2
Touch [Device Name].
 Change Device Name screen appears.
3
Touch and hold [ ].
4
Input the device name.
5
Touch [Enter].

Kenwood DMX7520DABS Specifications

General

Brand	Kenwood
Model	DMX7520DABS
Category	Monitor
Language	English