EasyManua.ls Logo

Kenwood DNX6000EX - Service Manual

Kenwood DNX6000EX
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
This product uses Lead Free solder.
This product complies with the
RoHS directive for the European market.
Ā© 2008-11 PRINTED IN JA PAN
B53-0693-00
(
N
)
429
MONITOR WITH DVD RECEIVER / GPS NAVIGATION SYSTEM
DDX5024/5034/5034BT/5034M
/5054/514/54R
DNX5140/5240/5240BT/6000EX /6140
SERVICE MANUAL
* Depends on the models. Refer to the parts list.
Remote controller *
(A70-2083-15)
Size AAA battery
Not supplied
RC-DV340
Escutcheon
(B07-3165-02)
Mounting hardware assy
(J22-0657-03)
Lever
(D10-7012-04) x2
Escutcheon *
(B07-3172-12)
DC cord *
(E30-6796-05)
DC cord *
(E30-6881-05)
Screw set *
(N99-1779-15)
Adhesive double-
coated tape
*
(H30-0595-04)
Antenna module(GPS-ANT) *
(W02-5305-05)
Mounting hardware *
(J21-9867-04)
Panel assy *
(A64-)
Illustrations is DNX5240BT
Except K,R type Only DNX DDX5034BT, DNX5240BT/6000EX/6140
Microphone *
(W01-1718-05)
Test Mode and Adjustment are the same as DDX5022’s.
Please refer to the service manual (DDX5022’s: B53-0620-00).
PCB extension JIGs is the same as DDX5022’s.
Please refer to STR_B250-08-010E.
The IC3, and IC11 in the DVD unit (X37-123-00/1250-00) are not replaceable components.
When these ICs are defective, replace the whole DVD mechanism assembly (X92-6380-00
/6400-00). You cannot replace only the board.

Other manuals for Kenwood DNX6000EX

Related product manuals