Do you have a question about the Kenwood DPX301 and is the answer not in the manual?
frequency range | 87.9 MHz – 107.9 MHz |
---|---|
usable sensitivity | 9.3 dBf (0.8 μV/75 Ω) |
quieting sensitivity | 15.2 dBf (1.6 μV/75 Ω) |
frequency response | 30 Hz – 15 kHz |
signal to noise ratio | 70 dB |
selectivity | ≥ 80 dB |
stereo separation | 40 dB |
frequency range | 530 kHz – 1700 kHz |
---|---|
usable sensitivity | 28 dBμ (25 μV) |
spindle speed | 1000 – 400 rpm |
---|---|
frequency response | 10 Hz – 20 kHz |
total harmonic distortion | 0.008 % |
signal to noise ratio | 105 dB |
dynamic range | 93 dB |
maximum output power | 50 W x 4 |
---|---|
full bandwidth power | 22 W x 4 |
speaker impedance | 4 – 8 Ω |
tone action bass | 100 Hz ± 8 dB |
tone action middle | 1 kHz ± 8 dB |
tone action treble | 10 kHz ± 8 dB |
frequency response | 20 Hz – 20 kHz |
---|---|
input maximum voltage | 1200 mV |
input impedance | 100 kΩ |
operating voltage | 14.4 V |
---|---|
current consumption | 10 A |
installation size | 182 x 100 x 155 mm |
weight | 3.4 lbs (1.55 kg) |