R
Rhonda HarrisAug 27, 2025
How to fix 'NO DEVICE' error on Kenwood Car Receiver?
- SSarah AndersonAug 27, 2025
If your Kenwood Car Receiver displays 'NO DEVICE', connect a USB device and change the source to USB again.
To Next PageTo Next PageHow to fix 'NO DEVICE' error on Kenwood Car Receiver?
If your Kenwood Car Receiver displays 'NO DEVICE', connect a USB device and change the source to USB again.
Why does the sound skip on my Kenwood DPX301U?
If playback is intermittent or the sound skips on your Kenwood Car Receiver, try turning off the power saving mode on the Android device.
Why there is no sound during playback on my Kenwood Car Receiver?
If the sound cannot be heard during playback on your Kenwood Car Receiver, try reconnecting the Android device. If in [HAND MODE], launch any media player application and start playback, or relaunch the current media player application. Alternatively, restart the Android device. If the problem persists, the connected Android device may be unable to route the audio signal to the unit.
What to do if Kenwood Car Receiver shows 'ANDROID ERROR / NA DEVICE'?
If the Kenwood Car Receiver displays 'ANDROID ERROR / NA DEVICE', try reconnecting the Android device, or restart the Android device.
General| Channels | 4 |
|---|---|
| Tuner | AM/FM |
| Bluetooth | Yes |
| USB Port | Yes |
| AUX Input | Yes |
| Display Type | LCD |
| iPod Compatibility | Yes |
| Android Compatibility | Yes |
| HD Radio | No |
| RMS Power Output | 22W |
| Peak Power Output | 50W |
| Preamp Outputs | 2-channel |
| Compatible Formats | MP3, WMA |
| Satellite Radio | Ready |
