V
Valerie WhiteAug 31, 2025
Why does my Kenwood Car Stereo System display “MEMORY FULL”?
- GGabriel SweeneyAug 31, 2025
If you see “MEMORY FULL”, it means you have reached the maximum storage limit of your iPod/iPhone.
To Next PageTo Next PageWhy does my Kenwood Car Stereo System display “MEMORY FULL”?
If you see “MEMORY FULL”, it means you have reached the maximum storage limit of your iPod/iPhone.
What does “ADD ERROR” mean on my Kenwood Car Stereo System?
New station creation is unsuccessful.
What does “UNRESPONSIVE DEVICE” mean on my Kenwood Car Stereo System and how do I fix it?
If “UNRESPONSIVE DEVICE” appears, make sure the USB device is not malfunctioning and reattach it.
What does “CHECK DEVICE” mean on my Kenwood DPX304MBT?
Check the Pandora application on your device.
What does “CODE ERROR” mean on my Kenwood DPX304MBT?
Make sure you have entered the correct pass code.
What does “NO ENTRY”/“NO PAIR” mean on my Kenwood DPX304MBT?
There is no registered device connected/found via Bluetooth.
What to do if my Kenwood DPX304MBT Car Stereo System shows “USB HUB IS NOT SUPPORTED”?
If “USB HUB IS NOT SUPPORTED” appears, turn the power off, unplug the USB device, then turn the power back on and reattach the USB device. If that doesn't work, try turning the power off and on again or resetting the unit before trying a different USB device.
Why is there echo or noise during phone calls with my Kenwood DPX304MBT Car Stereo System?
If you experience echo or noise during calls, try adjusting the microphone unit’s position. You can also check the [ECHO CANCEL] setting.
How to fix Bluetooth pairing issues with my Kenwood Car Stereo System?
If you're having trouble pairing, ensure you've entered the same PIN code on both the unit and your Bluetooth device. If it still fails, delete the pairing information from both the unit and the Bluetooth device, and then try pairing again.
What does “NO DEVICE” mean on my Kenwood Car Stereo System?
If you see “NO DEVICE”, it means no device is connected. Connect a device (USB/iPod/iPhone), and change the source to USB/iPod FRONT/iPod REAR/iPod USB again.
General| Brand | Kenwood |
|---|---|
| Model | DPX304MBT |
| Category | Car Stereo System |
| Language | English |
Compliance with FCC rules for digital devices and potential interference.
Compliance with RF exposure limits and guidelines.
Essential safety advice, warnings, and precautions for operation.
Diagram and labels identifying front panel controls and indicators.
Initial setup for display language selection and demo mode.
Playing music from CDs, USB devices, and iPod/iPhone.
Pairing, connecting, and managing Bluetooth devices.
Professional guide for wiring and mounting the unit.
Solutions for common operational, connectivity, and audio problems.
