To Next PageTo Next Page
Need help?Do you have a question about the Kenwood DPX313 and is the answer not in the manual?
FM Tuner Section| frequency range | 87.5 MHz – 108.0 MHz |
|---|---|
| usable sensitivity | 0.7 μV/75 Ω |
| quieting sensitivity | 1.6 μV/75 Ω |
| frequency response | 30 Hz – 15 kHz |
| signal to noise ratio | 65 dB |
| selectivity | ≥ 80 dB |
| stereo separation | 35 dB |
MW Tuner Section| frequency range | 531 kHz – 1611 kHz |
|---|---|
| usable sensitivity | 25 μV |
LW Tuner Section| frequency range | 153 kHz – 281 kHz |
|---|---|
| usable sensitivity | 45 μV |
CD Player Section| laser diode | GaAlAs |
|---|---|
| digital filter | 8 Times Over Sampling |
| d/a converter | 24 Bit |
| spindle speed | 500 – 200 rpm (CLV) |
| frequency response | 10 Hz – 20 kHz |
| total harmonic distortion | 0.008 % |
| signal to noise ratio | 105 dB |
| dynamic range | 93 dB |
| mp3 decode | Compliant with MPEG-1/2 Audio Layer-3 |
| wma decode | Compliant with Windows Media Audio |
| aac decode | AAC-LC “.m4a” files |
Audio Section| maximum output power | 50 W x 4 |
|---|---|
| full bandwidth power | 30 W x 4 |
| speaker impedance | 4 – 8 Ω |
| tone action bass | 100 Hz ±8 dB |
| tone action middle | 1 kHz ±8 dB |
| tone action treble | 10 kHz ±8 dB |
| preout level / load | 2500 mV/10 kΩ |
| preout impedance | ≤ 600 Ω |
Auxiliary Input| frequency response | 20 Hz – 20 kHz |
|---|---|
| input maximum voltage | 1200 mV |
| input impedance | 100 kΩ |
General| operating voltage | 14.4 V |
|---|---|
| current consumption | 10 A |
| installation size | 182 x 112 x 160 mm |
| weight | 1.6 kg |
Guides on first-time use, demonstration mode cancellation, and unit reset procedures.
Instructions for cleaning the unit, managing lens fogging, and proper handling of CDs, including unusable types.
Covers power, source selection, volume adjustment, attenuation, and phone call muting.
Explains how to connect and configure auxiliary input and subwoofer output settings.
Details how to access the Function Control menu and scroll text/titles on the display.
Covers band selection (FM/AM) and frequency tuning using the control knob.
Details auto memory entry and preset tuning for memorizing and recalling radio stations.
Explains how to enable and use the Traffic Information (TI) function for broadcast bulletins.
Instructions for playing CDs, USB devices, and iPods, including disc insertion and ejection.
Covers playback controls like pause, play, search, repeat, scan, and random playback modes.
Manages security codes, source selection methods, iPod mode, and illumination color settings.
Adjusts display behavior, illumination, preout settings, amplifier, and dual zone audio output.
Configures tuner reception modes, news bulletins, AF, regional settings, and disc/AUX naming.
Covers language settings, display options, power timer, CD read method, and opening messages.
Adjusts sound system parameters including DTA, X'Over, EQ, listening position, loudness, and preset sound settings.
Controls various playback modes (scan, random, repeat) and memory functions for tuner presets.
Details the procedure for entering Function Control, selecting items, making adjustments, and exiting the mode.
Explains the various display types and their configurable elements for different sources.
Details how to select and customize the text information displayed for tuner, CD, and audio file sources.
Guides on selecting panel illumination colors and creating custom user-defined colors.
Explains how to save chosen illumination color settings as presets and recall them later.
Restores saved custom illumination color settings to the unit.
Provides steps to name CDs, allowing for personalized identification and easier management.
Configures how auxiliary input sources are displayed when selected.
Guides on creating and setting a custom message that appears when the unit powers on.
Covers music selection from media and direct track searching by number.
Details the process of searching for specific discs using their number, primarily for changers.
Covers selecting the CD changer source and performing music searches.
Details how to enable repeat play for songs or discs and magazine random play.
Covers memorizing radio stations and recalling them using preset buttons.
Details direct radio frequency tuning and changing the display language for PTY information.
Guides on selecting and searching for stations based on Program Type classifications.
Details how to save Program Types to presets and recall them for quick station searching.
Procedures for setting a personal 4-digit security code to protect the unit.
Steps to disable the security code function and remove any previously set code.
Covers manual adjustment of the unit's clock and date settings.
Manages the demonstration mode and controls connected LX amplifiers.
Adjusts sound based on car type for optimal audio performance by compensating speaker placement.
Fine-tunes speaker position compensation values to synchronize sound arrival times.
Adjusts speaker crossover frequencies, including high-pass and low-pass filter settings.
Controls equalizer levels (bass, middle, treble) and selects preset listening positions for sound compensation.
Fine-tunes individual speaker position compensation values set in Preset position selection.
Registers sound control configurations into memory for easy recall and reuse.
Restores sound settings that were previously saved in Audio Preset Memory.
Controls rear volume, subwoofer level, System Q, balance, and fader for audio output.
Sets up audio parameters including filters, subwoofer phase, volume offset, loudness, and dual zone system.
Selects speaker types to ensure optimal performance of the System Q audio feature.
Registers sound control settings into memory, allowing them to be saved.
Retrieves and applies previously saved audio settings from memory.
Operates tuner functions and controls playback for CD/USB sources.
Manages volume, source selection, audio item adjustments, and dual zone system control.
Lists compatible audio file formats, disc media, and file system types for playback.
Provides guidance on connecting USB devices, supported file systems, and important usage notes.
Details specific control operations when using the optional KCA-BT100 Bluetooth unit.
Explains specific Function Control items like SRC Select, Display, ILM Dimmer, AT COL CHG, SWPRE, AMP, Zone2, and Supreme.
Covers news bulletin settings, seek modes, Alternative Frequency, Russian language display, and power timer.
Details CD reading methods, display reversal options, and the concepts behind Cabin selection and DTA.
Step-by-step instructions and diagrams for measuring distances to set up Digital Time Alignment.
Guidance on disposing of electronic waste and batteries, and information on the Class 1 Laser Product marking.
Lists included accessories and provides a step-by-step guide for unit installation.
Critical safety advice and guidelines for wiring, mounting, and potential installation issues.
Provides a comprehensive diagram for connecting the main wiring harness to the unit and vehicle.
Explains the specific connections for TEL mute, power control, and antenna control wires.
Lists pin numbers, cable colors, and functions for ISO external power and speaker connectors.
Shows typical wiring configurations for ISO connectors, including specific vehicle adaptations.
Provides instructions and diagrams for securely mounting the unit in the vehicle.
Guides on removing the hard rubber frame and then safely extracting the main unit.
Addresses issues caused by settings, touch sensor tone, illumination effects, and poor radio reception.
Provides solutions for disc playback errors and audio file playback problems like skipping or noise.
Explains system condition messages like TOC Error, Protect, and Read Error, with troubleshooting advice.
Provides solutions for USB and iPod errors, including connection issues and safe removal.
Details specifications for FM/MW/LW tuners and the CD player, including frequency responses and sensitivities.
Covers USB interface standards, audio output power, speaker impedance, and auxiliary input parameters.
Provides overall unit specifications such as operating voltage, current consumption, dimensions, and weight.
