S
sergio35Aug 31, 2025
Why does my Kenwood DPX504BT Car Stereo System display “MEMORY FULL”?
- AAimee HamiltonAug 31, 2025
If you see “MEMORY FULL”, it means you have reached the maximum storage limit of your iPod/iPhone.
To Next PageTo Next PageWhy does my Kenwood DPX504BT Car Stereo System display “MEMORY FULL”?
If you see “MEMORY FULL”, it means you have reached the maximum storage limit of your iPod/iPhone.
What does “ADD ERROR” mean on my Kenwood Car Stereo System?
New station creation is unsuccessful.
What does “UNRESPONSIVE DEVICE” mean on my Kenwood DPX504BT and how do I fix it?
If “UNRESPONSIVE DEVICE” appears, make sure the USB device is not malfunctioning and reattach it.
What does “CHECK DEVICE” mean on my Kenwood DPX504BT?
Check the Pandora application on your device.
What does “CODE ERROR” mean on my Kenwood DPX504BT Car Stereo System?
Make sure you have entered the correct pass code.
What does “NO ENTRY”/“NO PAIR” mean on my Kenwood DPX504BT Car Stereo System?
There is no registered device connected/found via Bluetooth.
What to do if my Kenwood DPX504BT shows “USB HUB IS NOT SUPPORTED”?
If “USB HUB IS NOT SUPPORTED” appears, turn the power off, unplug the USB device, then turn the power back on and reattach the USB device. If that doesn't work, try turning the power off and on again or resetting the unit before trying a different USB device.
Why is there echo or noise during phone calls with my Kenwood DPX504BT?
If you experience echo or noise during calls, try adjusting the microphone unit’s position. You can also check the [ECHO CANCEL] setting.
How to fix Bluetooth pairing issues with my Kenwood DPX504BT?
If you're having trouble pairing, ensure you've entered the same PIN code on both the unit and your Bluetooth device. If it still fails, delete the pairing information from both the unit and the Bluetooth device, and then try pairing again.
What does “NO DEVICE” mean on my Kenwood Car Stereo System?
If you see “NO DEVICE”, it means no device is connected. Connect a device (USB/iPod/iPhone), and change the source to USB/iPod FRONT/iPod REAR/iPod USB again.
General| Power Output | 50W x 4 |
|---|---|
| Bluetooth | Yes |
| USB Ports | 1 |
| Display Type | LCD |
| Radio Tuner | AM/FM |
| Equalizer | 13-band |
| DIN Size | Double DIN |
| Preamp Voltage | 2.5V |
| Peak Output | 50W x 4 |
| AUX Input | Yes |
| SiriusXM Ready | Yes |
| Pandora Control | Yes |
| iHeartRadio Control | Yes |
| Spotify Control | Yes |
| Color customization | Yes |
| Remote Control | Yes |
| CD Player | Yes |
| Compatible Formats | MP3, WMA |
| RMS Power Output | 22W x 4 |
