EasyManua.ls Logo

Kenwood JE350 series User Manual

Kenwood JE350 series
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Do not use the juicer if the filter is damaged.
Never put the motor unit, cord or plug in water – you could get an electric
shock.
Switch off and unplug:
before fitting or removing parts
before cleaning
after use.
Never use a damaged juicer. Get it checked or repaired: see 'Service and
customer care', page 6.
Only use the pusher supplied. Never put your fingers in the feed tube. Unplug
before unblocking the feed tube.
Before removing the lid, switch off and wait for the filter to stop.
Don't let children or infirm people use the juicer without supervision.
Never let the cord touch hot surfaces or hang down where a child could grab it.
Don't touch moving parts.
Never leave the juicer on unattended.
This juicer is for domestic use only.
Don’t let children play with the machine.
before plugging in
Make sure your electricity supply is the same as the one shown on the
underside of your juicer.
Important (UK only)
The wires in the cord are coloured as follows:
Blue = Neutral, Brown = Live.
This juicer complies with European Economic Community Directive 89/336/EEC.
before using for the first time
1 Remove all packaging.
2 To take your juicer apart: see 'To take your juicer apart', page 5.
3 Wash the parts: see 'Cleaning', page 5.
KENWOOD JE350 & JE356 SERIES
safety
1
Question and Answer IconNeed help?

Do you have a question about the Kenwood JE350 series and is the answer not in the manual?

Kenwood JE350 series Specifications

General IconGeneral
BrandKenwood
ModelJE350 series
CategoryJuicer
LanguageEnglish

Summary

safety

know your Kenwood centrifugal juicer

to assemble and use your juicer

preparing food

Steps for preparing fruits and vegetables before juicing, including peeling and washing.

assembly and use

Instructions for assembling the juicer and operating it for juicing.

hints

to take your juicer apart

cleaning

motor unit

Wipe the motor unit with a damp cloth and then dry it.

pulp collector, lid, pusher

Wash the pulp collector, lid, and pusher, then dry them.

filter

Clean the filter using a soft brush and check for damage.

service and customer care

guarantee

Details of the product guarantee, conditions for repair or replacement, and statutory rights.

instructions

Related product manuals