Kenwood KAC-322 User Manual

STEREO POWER AMPLIFIER
KAC-322
INSTRUCTION MANUAL
KENWOCD CORPORATION
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures
will help you obtain the best performance from your
new power amplifier.
For your records
Record the serial number found on the bottom of the unit
in the spaces designated on the warranty card and in the
space provided below. Refer to the model and serial
numbers whenever you call upon your KENWCOD dealer
for information or service on this product.
Model KAC-322 Serial number
©@PRINTED IN JAPAN B64-0086-C0(K)(MS)
ga/i2 110 98TS

Kenwood KAC-322 Specifications

General

Channels	2
Frequency Response	10 Hz - 50 kHz
Signal-to-Noise Ratio	95 dB
THD at 4 Ohms	0.08%
Bridged RMS Power at 4 Ohms	150 Watts
Input Sensitivity	0.2V - 5V
RMS Power at 2 Ohms	75W x 2

Summary

INSTALLATION

Installation

Details the physical mounting of the unit using screws and ensuring secure installation.

Installation location

Specifies suitable places for mounting the amplifier in a vehicle, considering ventilation and clearance.

CLEANING

TROUBLESHOOTING GUIDE

SPECIFICATIONS