Need help?Do you have a question about the Kenwood KAC-642 and is the answer not in the manual?
Critical precautions to prevent electric shock, fire, and injury during operation.
Guidelines for cleaning the unit's exterior with soft cloths and mild detergent.
Advisory regarding radio frequency energy and unauthorized modifications.
Step-by-step guide for safely wiring the amplifier to the car audio system.
Explanation of input sensitivity controls and mode switches for system adjustment.
Demonstrates various system configurations using the amplifier and its modes.
Instructions for securely mounting the unit and selecting an appropriate installation site.
Tables for 6 dB/octave high and low pass filters, including coil and capacitor values.
Tables for 12 dB/octave high and low pass filters, including coil and capacitor values.
Common operational issues, their causes, and recommended solutions.
Detailed technical data on audio performance, general features, and dimensions.
Critical precautions to prevent electric shock, fire, and injury during operation.
Guidelines for cleaning the unit's exterior with soft cloths and mild detergent.
Advisory regarding radio frequency energy and unauthorized modifications.
Step-by-step guide for safely wiring the amplifier to the car audio system.
Explanation of input sensitivity controls and mode switches for system adjustment.
Demonstrates various system configurations using the amplifier and its modes.
Instructions for securely mounting the unit and selecting an appropriate installation site.
Tables for 6 dB/octave high and low pass filters, including coil and capacitor values.
Tables for 12 dB/octave high and low pass filters, including coil and capacitor values.
Common operational issues, their causes, and recommended solutions.
Detailed technical data on audio performance, general features, and dimensions.
General| Channels | 4 |
|---|---|
| Signal-to-Noise Ratio | 100dB |
| THD at 4 Ohms | 0.08% |
| Input Impedance | 10k Ohms |
| RMS Power (4 Ohms) | 40 Watts x 4 |
| Input Sensitivity | 200mV - 4V |
| Crossover | 12dB/octave |
To Next Page
