To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KAC-6403 and is the answer not in the manual?
Audio Section| max power output | 500W |
|---|---|
| rated power output normal (4Ω) | 40W x 4 |
| rated power output bridged (4Ω) | 120W x 2 |
| frequency response | 10Hz~50kHz |
| sensitivity max | 0.2V |
| sensitivity min | 5.0V |
| signal to noise ratio | 100dB |
| input impedance | 10kΩ |
| low pass filter frequency | 80Hz |
| high pass filter frequency | 80Hz |
General| operating voltage | 14.4V (11~16V allowable) |
|---|---|
| current consumption | 25A |
| dimensions | 330 x 60 x 230 mm |
| weight | 2.7kg (6.0 lbs) |
Key safety warnings and cautions to prevent injury, fire, or damage.
Specific warnings for operation and handling to prevent hazards.
Advisories on suitable and unsuitable locations for unit installation.
Conditions under which the protection function is activated.
Information on stereo and bridged speaker connections and impedance.
Solutions for problems like no sound or no sound from one side.
Solutions for low output, distorted sound, or incorrect levels.
Detailed audio performance metrics like power output and frequency response.
General unit information including voltage, current, dimensions, and weight.
