Need help?Do you have a question about the Kenwood KC-991 and is the answer not in the manual?
Performance| input sensitivity phono | 2.5 mV/47 kΩ |
|---|---|
| input sensitivity tuner/tape/cd/video | 200 mV/47 kΩ |
| signal-to-noise ratio phono | 80 dB for 2.5 mV input |
| signal-to-noise ratio tuner/tape/cd/video | 101 dB |
| phono maximum input level | 100 mV, T.H.D. 0.3% at 1 kHz |
Output Voltage and Impedance| tape pre out rec | 2001 V/2.2 mV/220 kΩ |
|---|
Power| power consumption | 15 W |
|---|---|
| switched AC outlets USA and Canada | 2; Total 680 W, 5.6 A max. |
| switched AC outlets other countries | 2; Total 420 W |
Weight and Dimensions| width | 440 mm (17-5/6") |
|---|---|
| height | 85 mm (3-3/8") |
| depth | 277 mm (10-7/8") |
| weight | 3.8 kg (8.4 lb) |
Store serial number for warranty and service information.
Instructions for unpacking and checking for shipping damage.
Details voltage requirements for different countries and regions.
Instructions for setting the voltage selector switch on the rear panel.
Essential warnings about electric shock, fire, and proper usage.
Guidelines for safe power cord use, grounding, ventilation, and temperature.
Precautions regarding heat, moisture, enclosure, magnetic fields, and cleaning.
Safety for carts, non-use, damage, servicing, power lines, AC outlets.
Grounding requirements for external antennas.
Identifies and explains front panel controls and indicators.
Details on Standby mode and display scroll function.
Illustrates connections between the control amplifier and other components.
Notes on secure connections and safe power cord handling.
Diagram for connecting system control cords for integrated operation.
Distinction between switched and unswitched AC outlets.
Describes automatic playback and synchronized recording.
How system components are controlled remotely.
Powering on, source selection, volume, and balance adjustment.
Mute and Loudness functions for sound control.
Function for optimal CD sound reproduction.
Process for recording one source while playing a CD.
Steps for recording audio onto cassette tape.
Instructions for copying tapes between decks.
Recording with applied equalizer effects.
Adjusting frequency bands and levels for sound profiles.
Saving equalizer patterns to memory.
Retrieving stored equalizer settings.
How to enable or disable the equalizer.
Spectrum Analyzer and Graphic Equalizer displays.
Adjusting sound based on listening room characteristics.
Enhancing or attenuating specific audio frequencies.
Explanation of the remote's operational modes.
Guidance on using the overlay sheet for programming.
Step-by-step guide to program the RC-140 with other remote signals.
Verifying and modifying programmed remote control functions.
Resetting the RC-140 to its initial state.
Standard operation of the remote control.
Solutions for common sound output and noise problems.
Troubleshooting remote control operation problems.
Detailed performance characteristics of the unit.
Power, dimensions, and compliance details.
To Next Page
