Kenwood KC-105 User Manual

STEREO
CONTROL
AMPLIFIER
KC-105
KENWOOD
TRIO-KENWOOD CORPORATION
INSTRUCTION MANUAL
©PRINTED IN JAPAN 850-6112-00(K,P,U,M,UE,XXT)
87/654321 86121109876543
Rear panel safety precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE CO/ ER
(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intendeg to
alert the user to the presence of uninsulated ‘‘dangerous voltage’ within the prodict’s
enclosure; that may be of sufficient magnitude to constitute a risk of electric shok« to
persons.
The exclamation point within an equilateral triangle is intended to alert the user tct he
presence of important operating and maintenance (servicing) instructions int he
literature accompanying the appliance.
Ano

Kenwood KC-105 Specifications

General

Brand	Kenwood
Model	KC-105
Category	Amplifier
Language	English

Summary

Rear Panel Safety Precautions

General Safety Warnings

Describes safety symbols and general precautions for electric shock and warnings.

Setup and Initial Power-On

Before Applying Power

Provides important notes on installation and initial setup before powering on the unit.

AC Voltage Selection

Explains how to set the AC voltage selector switch for different regions.

Operation and Installation Guidelines

Notes on Installation

Details environmental and placement considerations for optimal unit performance and safety.

Safety Precautions

Lists critical safety measures to prevent electric shock and damage during operation.

Cleaning Instructions

Provides guidance on cleaning the unit's cabinet using appropriate materials.

System Connections

Connecting Power Amplifier

Instructions for connecting the unit to a power amplifier via audio cables.

Connecting Turntable

Guide to connecting a turntable, including phono plugs and ground wire.

Connecting CD Player

Steps for connecting a CD player to the designated input jacks.

Connecting Tuner

How to connect an FM or AM-FM stereo tuner to the unit's tuner jacks.

Connecting Tape Decks

Details on connecting tape decks for recording and playback.

Unswitched AC Outlet

Information about the rear panel's unswitched AC outlet for powering other devices.

Controls and Indicators Overview

Power and Equalizer Controls

Describes the power switch, equalizer, EQ REC, and graphic equalizer controls.

Filter, Loudness, and Record Switches

Explains the subsonic filter, loudness, and PHONO REC switches.

Input Selector Switches

Details the function of various input selector switches for program sources.

Volume and Balance Adjustment

Guides on using the volume and balance controls for sound adjustment.

Operating Instructions

Listening to Program Sources

Steps for selecting and listening to various audio program sources.

Recording Program Sources

Instructions for recording audio from different sources onto tape decks.

Tape-to-Tape Dubbing Procedures

Guides for dubbing audio between tape decks.

System Control Connections

Objective Models and Operation Keys

Lists compatible models and explains operation keys for system control.

Troubleshooting Guide

No Sound or Channel Issues

Troubleshooting steps for issues with no sound or missing channels.

Sound Output and Balance Problems

Resolving issues with sound output from one channel or balance problems.

Hum and Noise Resolution

Steps to eliminate humming, buzzing, or howling noises in the audio output.

Product Specifications

Performance Specifications

Details on input sensitivity, signal-to-noise ratio, frequency response, and distortion.

General Specifications

Includes power requirements, consumption, dimensions, and weight.