Do you have a question about the Kenwood KA-76 and is the answer not in the manual?
rated power output | 100 watts per channel minimum RMS at 8 ohms |
---|---|
music power output | 225 W + 225 W at 8 ohms |
total harmonic distortion at rated output | 0.05% from 20 Hz to 20, 000 Hz |
frequency response | 10 Hz to 70 kHz, +0 dB, -3 dB |
---|---|
intermodulation distortion | 0.03% at rated power into 8 ohms |
power bandwidth | 10 Hz ~ 100 kHz at 0.2% T.H.D. |
input sensitivity/impedance for Phono MM | 2.5 mV:47 k ohms |
---|---|
input sensitivity/impedance for TUNER, AUX., TAPE PLAY | 150 mV:33 k ohms |
maximum input level for Phono MM | 170 mV RMS at T.H.D. 0.05% at 1 kHz |
output level/impedance for TAPE REC | 150 mV:330 ohms |
---|---|
signal-to-noise ratio for Phono MM | 75 dB for 2.5 mV input |
signal-to-noise ratio for TUNER, AUX., TAPE PLAY | 100 dB |
power consumption | 4 A (USA and Canada), 220 W (Others) |
---|---|
dimensions (W x H x D) | 420 mm x 110 mm x 277 mm |
weight | 7.2 kg |