Need help?Do you have a question about the Kenwood KCA-RC55MR and is the answer not in the manual?
General| Compatibility | Kenwood marine receivers |
|---|---|
| Water Resistance | Yes |
| Display | No |
| Wiring | Wired |
| Cable Length | 5 meters |
| Color | Black |
| Weight | 150 grams |
| Type | Wired Remote Control |
| Control Functions | Volume, Source, Track Up/Down |
Explains the purpose and operation of each button on the remote control unit.
Describes connecting a single remote control unit to the marine receiver.
Details the connection setup for two remote control units.
Illustrates the connection for three remote control units.
Details potential radio frequency energy use and interference warnings.
States compliance with Part 15 of FCC Rules and operational conditions.
Confirms compliance of the digital apparatus with Canadian standards.
Guides user to select STANDBY and enter function setting mode on the receiver.
Instructs on selecting Initial Settings, Remote Settings, and Remote ID Set.
Explains how to select an ID and initiate the registration process.
Details the process for registering specific remote control IDs.
Instructs on how to properly exit the function setting mode on the receiver.
To Next Page
