To Next PageTo Next PageHow to fix intermittent playback or sound skips on Kenwood KDC-200UB?
To resolve intermittent playback or sound skipping on your Kenwood Car Receiver, turn off the power saving mode on the Android device.
What to do if my Kenwood KDC-200UB disc cannot be ejected?
If your Kenwood Car Receiver is not ejecting the disc, press and hold the M button to forcibly eject it. Be careful not to drop the disc when it comes out. If it still doesn't eject, reset the unit.
Why does my Kenwood KDC-200UB say “NO DISC”?
The Kenwood Car Receiver displays “NO DISC” when there is no playable disc inserted. To fix this, insert a playable disc into the loading slot.
Why does my Kenwood Car Receiver say “NO DEVICE”?
The Kenwood Car Receiver displays “NO DEVICE” when a USB device is not connected. Connect a USB device, and change the source to USB again.
Why does my Kenwood Car Receiver sound cannot be heard during playback?
If you cannot hear sound during playback on your Kenwood Car Receiver, try the following: * Reconnect the Android device. * If in [HAND MODE], launch any media player application on the Android device and start playback. * If in [HAND MODE], relaunch the current media player from the Android application or use another media player application on the device. * Restart the Android device. If the issue persists, the connected Android device may be unable to route the audio signal to the unit.
Why does my Kenwood KDC-200UB radio reception is poor?
If you are experiencing poor radio reception with your Kenwood Car Receiver, ensure the antenna is firmly connected.
Why does my Kenwood KDC-200UB cannot playback at [BROWSE MODE]?
If your Kenwood Car Receiver cannot playback at [BROWSE MODE], make sure KENWOOD MUSIC PLAY APP is installed on the Android device. Reconnect the Android device and select the appropriate control mode. If the problem persists, the connected Android device may not support [BROWSE MODE].
Why does my Kenwood KDC-200UB Car Receiver say “NA FILE”?
The Kenwood Car Receiver displays “NA FILE” if the disc does not contain supported audio files. Make sure the disc contains supported audio files.
Why does my Kenwood KDC-200UB say “NO MUSIC”?
The Kenwood Car Receiver displays “NO MUSIC” when a USB device without playable audio files is connected. Connect a USB device that contains playable audio files.
Why does my Kenwood Car Receiver say “READ ERROR”?
If your Kenwood Car Receiver displays “READ ERROR”, copy the files and folders onto the USB device again. If the problem persists, reset the USB device or try using another USB device.
General| Power Output | 50W x 4 |
|---|---|
| RMS Power | 22W x 4 |
| Tuner | FM/AM |
| CD Playback | Yes |
| USB Input | Yes |
| Bluetooth | No |
| Aux Input | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| FLAC Playback | No |
| Detachable Face | Yes |
| USB Direct Control for iPod/iPhone | Yes |
| CD-R/RW Playback | Yes |
| Subwoofer Output | Yes |
| Display | LCD |
| Preset EQ | Yes |
Essential reading before operation, covering warnings, cautions, and general advice.
Caution against operating functions that distract from safe driving.
Advice on volume, metallic objects, disc errors, and antenna extension.
Overview of the unit's front panel controls, display, and ports.
Description and diagram of the included remote control.
Steps to select the display language and disable the demonstration mode.
Guide to setting the current time, date format, and clock display.
How to access and configure various system settings, including audio control.
Basic playback operations like play, pause, skip, and folder selection.
Solutions for common issues related to sound, wiring, and radio reception.
Resolving issues with discs, USB, iPod, and Android playback.
Important safety warnings and cautions before installing the unit.
Step-by-step guide for installing the unit into the dashboard.
Detailed diagrams for connecting the unit's wiring harness to the vehicle.
Technical details for FM, MW, LW tuners and CD player functionality.
