Do you have a question about the Kenwood KDC-4070RA<u>/RG</u> and is the answer not in the manual?
frequency range | 87.5 MHz – 108.0 MHz |
---|---|
usable sensitivity | 0.7 µV/75 Ω |
signal to noise ratio (MONO) | 65 dB |
frequency range | 531 kHz – 1611 kHz |
---|---|
usable sensitivity | 25 µV |
laser diode | GaAlAs (λ=780 nm) |
---|---|
spindle speed | 500 – 200 rpm (CLV) |
frequency response | 10 Hz – 20 kHz |
maximum output power | 40 W × 4 |
---|---|
output power (DIN 45324, +B=14.4 V) | 26 W × 4 |
preout level / load | 1800 mV / 10 kΩ (During CD play) |
operating voltage | 14.4 V (11 – 16 V allowable) |
---|---|
current consumption | 10 A at Rated power |
installation size | 182 × 53 × 159 mm |
Essential safety guidelines to prevent personal injury and fire hazards.
Precautions to avoid damaging the unit and specific warning for 8-cm CDs.
Proper methods for handling, cleaning, and storing CDs to prevent damage.
Guidelines on what not to load into the CD slot to avoid malfunction.
How to power on/off, switch modes, and adjust volume.
Explanation of RDS and the Alternative Frequency function.
Tuning stations based on selected programme types.
Detailed guide on connecting various cables to the unit's terminals.
Specific instructions for connecting ISO connectors based on vehicle wiring.