To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KDC-5018 and is the answer not in the manual?
FM Tuner Section| Frequency range (200 kHz space) | 87.9 MHz – 107.9 MHz |
|---|---|
| Frequency range (50 kHz space) | 87.5 MHz – 108.0 MHz |
| Usable sensitivity (S/N = 30dB) | 9.3 dBf (0.8 µV/75 Ω) |
| Quieting Sensitivity (S/N = 50dB) | 15.2 dBf (1.6 µV/75 Ω) |
| Frequency response (±3 dB) | 30 Hz – 15 kHz |
| Signal to Noise ratio (MONO) | 70 dB |
| Selectivity (±400 kHz) | ≥ 80 dB |
| Stereo separation (1 kHz) | 40 dB |
AM Tuner Section| Frequency range (10 kHz space) | 530 kHz – 1700 kHz |
|---|---|
| Frequency range (9 kHz space) | 531 kHz – 1611 kHz |
| Usable sensitivity (S/N = 20dB) | 28 dBµ (25 µV) |
FM Tuner Section| Frequency range (50 kHz space) | 87.5 MHz – 108.0 MHz |
|---|---|
| Usable sensitivity (S/N = 26dB) | 0.7 µV/75 Ω |
| Quieting Sensitivity (S/N = 46dB) | 1.6 µV/75 Ω |
| Frequency response (±3 dB) | 30 Hz – 15 kHz |
| Signal to Noise ratio (MONO) | 65 dB |
| Selectivity (DIN) (±400 kHz) | ≥ 80 dB |
| Stereo separation (1 kHz) | 35 dB |
MW Tuner Section| Frequency range (9 kHz space) | 531 kHz – 1611 kHz |
|---|---|
| Usable sensitivity (S/N = 20dB) | 25 µV |
LW Tuner Section| Frequency range | 153 kHz – 281 kHz |
|---|---|
| Usable sensitivity (S/N = 20dB) | 45 µV |
CD Player Section| Laser diode | GaAlAs (λ=780 nm) |
|---|---|
| Digital filter (D/A) | 8 Times Over Sampling |
| D/A Converter | 1 Bit |
| Spindle speed | 500 – 200 rpm (CLV) |
| Frequency response (±1 dB) | 10 Hz – 20 kHz |
| Total harmonic distortion (1 kHz) | 0.01 % |
| Signal to Noise ratio (1 kHz) (KDC-7018) | 105 dB |
| Signal to Noise ratio (1 kHz) (KDC-V7018R/5018) | 93 dB |
| Dynamic range | 93 dB |
| Channel separation | 85 dB |
Audio Section| Maximum output power | 47 W × 4 |
|---|---|
| Full Bandwidth Power (at less than 1% THD) | 22 W × 4 |
| Tone action Bass | 100 Hz ±10 dB |
| Tone action Middle | 1 kHz ±10 dB |
| Tone action Treble | 10 kHz ±10 dB |
| Preout level / Load (during disc play) | 1800 mV/10 kΩ |
| Preout impedance | ≤ 600 Ω |
General| Operating voltage (11 – 16V allowable) | 14.4 V |
|---|---|
| Current consumption | 10 A |
| Installation Size (W x H x D) | 182 × 53 × 162 mm |
| Weight | 1.7 kg |
