Need help?Do you have a question about the Kenwood KDC-8080R and is the answer not in the manual?
General| Type | CD Receiver |
|---|---|
| Preamp Outputs | 3 (Front, Rear, Subwoofer) |
| Bluetooth | No |
| USB Port | No |
| Display | LCD |
| Equalizer | Yes |
| CD Changer Controls | Yes |
| Remote Control | Yes |
| Detachable Face | Yes |
| Channels | 4 |
| RMS Power Output | 22 Watts x 4 Channels |
| CD Player | Yes |
| MP3 Playback | No |
| WMA Playback | No |
| Preset EQ | Yes |
| Auxiliary Input | No |
| Tuner | AM/FM |
| DIN Size | 1 DIN |
| Max Power Output | 50 Watts x 4 Channels |
Covers fire prevention, short circuits, and physical hazards during operation and installation.
Covers grounding, installation environment, and fuse replacement procedures.
Lists compatible/incompatible changers and 8cm CD insertion caution.
Explains the anti-theft Mask Key system and its first-time usage.
Describes the purpose and use of the reset button for unit recovery.
Instructions for cleaning the unit, faceplate terminals, and CD slot.
Explains laser safety and resolves CD lens fogging issues.
Guidelines for safe CD handling, cleaning, and proper storage.
Warnings against using specific CD accessories or non-standard CD shapes.
Explains how the unit powers on/off and the faceplate's automatic movement.
Illustrates different display modes like full-screen, vertical, and horizontal.
How to cycle through different operating modes like Tuner, CD, and Standby.
Adjusting audio volume, using attenuator, and activating loudness.
Prevents tampering by hiding the control panel when the unit is serviced.
Customizing the information displayed on the unit's screen.
Temporarily mutes audio for incoming phone calls.
Step-by-step guide to detach and reattach the unit's faceplate.
Navigating through different audio parameters for adjustment.
Adjusting bass frequency, level, quality, and treble settings.
Fine-tuning bass extension and treble center frequency.
Adjusting speaker balance, fader, and configuring high-pass filters.
Adjusting low-pass filter and phase for non-fading output.
Saving and loading custom audio configurations.
Setting up speaker presets for different car audio environments.
Adjusting the faceplate angle for optimal viewing.
Enabling or disabling the non-fading audio output feature.
Instructions for tuning into radio stations using auto seek and manual methods.
Recalling stored radio stations using preset buttons.
Storing and recalling favorite radio stations.
Customizing the information displayed while listening to the radio.
Shows how to display station frequencies instead of names.
Improves reception by reducing interference between close stations.
Overview of the digital information system for radio broadcasts.
Receiving traffic info and emergency alerts via RDS.
Allows auto seek tuning based on selected program types.
Selecting and saving preferred program types for tuning.
Performing tuning based on program types and cancelling the function.
Listen to traffic information and receive automatic bulletin alerts.
Setting traffic volume and scrolling radio text information.
Overview of the buttons and display for CD playback and disc control.
Inserting, playing, pausing, and ejecting CDs.
Instructions for playing discs from connected external sources.
Fast forwarding, reversing, and searching for tracks or discs.
Customizing the display information during disc playback.
Repeating the current track or the entire disc during playback.
Storing custom names for discs for easier identification.
Playing the beginning of each track to find a desired song.
Scanning through discs in a changer to find a desired disc.
Playing tracks from the current disc in random order.
Playing tracks from all discs in the changer in random order.
Scrolling CD text, MD titles, and radio text for full display.
How to enter, navigate, and exit the unit's menu system.
Configuring beep sounds and manually adjusting the time.
Adjusting date formats and inputting text for the calendar function.
Detailed steps for inputting and managing text entries.
Synchronizing the unit's clock with RDS station time data.
Initial setup and re-transmission of the Mask Key signal.
Adjusting button illumination color and display brightness.
Controlling display dimming and graphic movement.
Enabling black mask display and setting faceplate removal timer.
Selecting between rear and non-fading preout signals.
Enabling separate audio sources for front and rear speakers.
Adjusting sound parameters and external amp bass boost.
Configuring manual open button and news bulletin interruptions.
Skipping poor reception stations and choosing tuning modes.
Automatically storing and recalling receivable radio frequencies.
Switching to better frequencies and restricting RDS channels by region.
Automatic traffic station seeking and improving mono reception.
Choosing between automatic and manual scrolling for text displays.
Overview of the steering remote control and battery replacement.
Using SRC, Volume, and Attenuator buttons via the remote.
Operating tuner bands and disc/track searches with the remote.
List of accessories provided with the unit for installation.
Step-by-step instructions for installing the unit in a vehicle.
Details for connecting power, speakers, and accessory cables.
Wiring for antenna, TEL mute, and external amplifier control.
Adapting connections based on vehicle ISO connector pin arrangements.
Steps to detach the hard rubber frame using a removal tool.
Procedure for safely removing the main unit from its mounting sleeve.
Securing the faceplate to the unit to prevent accidental detachment.
Mounting the steering remote control transmitter and operation sections.
Solutions for problems related to power, sound, and volume.
Troubleshooting button response, display issues, and wiring.
Addressing poor radio reception and memory loss issues.
Solutions for problems with CD loading, playback, and disc changer modes.
Addressing sound skips, no audio, and track playback errors.
Explains error codes (EJECT, NO DISC, E-04, etc.) and recommended actions.
Addressing HOLD condition due to temperature and CD-IN indicator blinking.
Technical details for tuner, audio output, and tone controls.
Specs for CD player, voltage, consumption, size, and weight.
To Next Page
