T
Thomas HendersonAug 2, 2025
What to do if Kenwood Cd receiver says “NO MUSIC”?
- SSandra RamirezAug 2, 2025
If your Kenwood Cd receiver displays “NO MUSIC”, connect a USB device that contains playable audio files.
To Next PageTo Next PageWhat to do if Kenwood Cd receiver says “NO MUSIC”?
If your Kenwood Cd receiver displays “NO MUSIC”, connect a USB device that contains playable audio files.
How to fix Kenwood Cd receiver when sound cannot be heard?
If you are not hearing any sound from your Kenwood Cd receiver, try the following: * Adjust the volume to the appropriate level. * Check the cords and connections to ensure they are properly connected.
What to do if Kenwood Cd receiver shows “iPod ERROR”?
If your Kenwood Cd receiver shows “iPod ERROR”, try these steps: * Reconnect the iPod. * Reset the iPod.
What to do if Kenwood Cd receiver displays “ANDROID ERROR”/“NA DEVICE”?
If you see “ANDROID ERROR” or “NA DEVICE” on your Kenwood Cd receiver, try reconnecting the Android device or restarting the Android device.
What to do if Kenwood Cd receiver says “DEVICE FULL”?
General| Bluetooth | Yes |
|---|---|
| USB Port | Yes |
| CD Playback | Yes |
| Radio Tuner | AM/FM |
| Display Type | LCD |
| Preamp Outputs | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| AAC Playback | Yes |
| FLAC Playback | No |
| Subwoofer Control | Yes |
| Channels | 4 |
| Auxiliary Input | Yes |
| Remote Control | Yes |
| Detachable Faceplate | Yes |
| Built-in Microphone | Yes |
| High-Pass Filter | Yes |
| Low-Pass Filter | Yes |
| Subwoofer Output | Yes |
| Preamp Outputs (Number) | 3 |
| Power Output (RMS) | 22 watts |
| Maximum Output Power | 50 watts |
| EQ Settings | 13-Band EQ |
| Preamp Voltage | 4 volts |
| Display Color | Variable Color Illumination |