How to fix poor phone sound quality on Kenwood kdc-bt700dab Car audio via Bluetooth?
To improve poor phone sound quality, try reducing the distance between the unit and the Bluetooth device. You can also move the car to a place where you can get a better signal reception.
How to fix Bluetooth pairing issues on my Kenwood Car audio?
If you are having trouble with Bluetooth pairing, ensure that you have entered the same PIN code on both the unit and the Bluetooth device. You can also try deleting pairing information from both the unit and the Bluetooth device, then perform pairing again.
How to solve sound interruption during Bluetooth playback on Kenwood kdc-bt700dab Car audio?
If sound is being interrupted or skipped during playback of a Bluetooth audio player, reduce the distance between the unit and the Bluetooth audio player. You can also turn off, then turn on the unit and try to connect again. Note that other Bluetooth devices might be trying to connect to the unit.
Why is there echo during phone calls with my Kenwood Car audio?
If you hear echo or noise during a phone conversation, adjust the microphone unit’s position. Also, check the [ECHO CANCEL] setting.
How to fix sound problems during Android playback on Kenwood kdc-bt700dab?
If sound cannot be heard during playback, reconnect the Android device. If in [HAND MODE], launch any media player application on the Android device and start playback. If in [HAND MODE], relaunch the current media player application or use another media player application. You can also restart the Android device. If this does not solve the problem, the connected Android device is unable to route the audio signal to unit.
What to do if “PROTECTING SEND SERVICE” appears on my Kenwood Car audio?
If the message “PROTECTING SEND SERVICE” appears, send the unit to the nearest service center.
What to do if “NO DEVICE” appears on Kenwood kdc-bt700dab?
If the message “NO DEVICE” appears, connect a USB device, and change the source to USB again.
What to do if my Kenwood kdc-bt700dab Car audio disc cannot be ejected?
If the disc cannot be ejected, press and hold M to forcibly eject the disc. If this does not solve the problem, reset the unit.
What to do if “NA DEVICE” appears on Kenwood Car audio?
If the message “NA DEVICE” appears, connect a supported USB device, and check the connections.
What does “COPY PRO” mean on Kenwood Car audio?
If the message “COPY PRO” appears, it indicates that a copy-protected file is being played.
General| Power Output | 4 x 50W |
|---|---|
| Bluetooth | Yes |
| DAB Radio | Yes |
| USB Input | Yes |
| Aux Input | Yes |
| Display Type | LCD |
| CD Player | Yes |
| Pre-out Voltage | 2.5V |
| Variable Illumination | Yes |
| DAB+ Antenna Included | Yes |
| Remote Control | Yes |
| Equalizer | 13-band Graphic EQ |
| Compatible Formats | MP3, WMA, WAV |
| Pre-outs | 3 |
| Media Type | USB, Bluetooth |
| Compatibility | Android |
To Next Page