Kenwood KDC-C467 User Manual

KDC-C717
KDC-C667
KDC-C467
COMPACT DISC AUTO CHANGER
INSTRUCTION MANUAL
CHANGEUR AUTOMATIQUE DE DISQUES COMPACTS
MODE D’EMPLOI
CAMBIADOR AUTOMATICO DE DISCOS COMPACTOS
MANUAL DE INSTRUCCIONES
CHANGER AUTOMÁTICO DE CDs
MANUAL DE INSTRUÇÕES
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help
you obtain the best performance from your new compact disc
auto changer.
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below.
Refer to the model and serial numbers whenever you call upon your
KENWOOD dealer for information or service on the product.
Model KDC-C717/C667/C467 Serial number
©B64-1797-00 (KW)

Kenwood KDC-C467 Specifications

Disc Section

laser diode wavelength	780 nm
digital filter	8 times over sampling
D/A converter	1 Bit

Performance

spindle speed	500 rpm∼200 rpm (CLV)
frequency response	10 Hz∼20 kHz (±1 dB)
total harmonic distortion	0.005% (1 kHz)

General

S/N ratio	100 dB
operating voltage	14.4 V (11 V∼16 V)
dynamic range	94 dB

Power

current consumption	1.4 A
current consumption CD changer	0.8 A
operating temperature	−10∼50°C

Dimensions and Weight

CD changer dimensions	250(W)×64(H)×176(D) mm
remote controller dimensions	50(W) × 145(H)×24(D) mm
weight CD changer	1.8 kg (4.0 lbs)

Summary

Safety Precautions

Fire and Personal Injury Prevention

Precautions to prevent fire and avoid personal injury.

Proper Unit Operation

Precautions for keeping the unit in proper working order.

Disc Handling

Guidelines for handling CDs to prevent skipping or malfunction.

Unit Environment and Maintenance

Care for lens fogging, heat protection, and cleaning.

Compact Disc Handling

Preventing Disc Damage

Take precautions to avoid damage to compact discs from stains, scratches, or warping.

Loading Compact Discs

Disc Magazine and Tray Insertion

Instructions for correctly inserting discs into the magazine tray.

Loading Procedure Precautions

Cautions regarding disc insertion, tray alignment, and 8cm discs.

Magazine Ejection

Steps for ejecting the disc magazine and important notes.

Connections and Settings

Connection Precautions

Important cautions for connecting the changer control cable and antenna.

O-N Switch Setting

How to set the O-N switch for proper control unit communication.

Installation Procedure

Removing Transportation Screws

Instructions to remove transportation screws before installation.

Angle Adjustment Switches

How to set angle adjustment switches for optimal sound.

Installation Precautions

Cautions regarding screw tightening and using dustproof seals.

Troubleshooting

Sound Skips Due to Vibration

Solutions for sound skipping caused by vibration.

Disc Changer Mode Selection

Troubleshooting for when the disc changer mode cannot be selected.

Specifications