Need help?Do you have a question about the Kenwood KDC-M6021/G and is the answer not in the manual?
Details components and functions for the switch unit.
Details components and functions for the electric unit.
Instructions for entering and exiting the service test mode.
Covers initial status, special displays, and audio/menu settings in test mode.
Component and foil side views for switch and daughter unit PC boards.
Visual breakdown of the unit's assemblies and components.
Identifies common hardware parts and their associated part numbers.
Comprehensive list of parts for the KDC-M6021/G unit.
Detailed listing of parts specific to the switch unit.
List of components for the electric unit, including diodes and capacitors.
List of components for the switch unit, including diodes and ICs.
Continuation of resistor listings for the electric unit.
Further resistor listings for the electric unit.
List of diodes, ICs, and transistors for the electric unit.
List of components for the daughter unit.
Technical details for the FM, AM, and LW receiver sections.
Technical details for amplifier, tone controls, and CD playback.
General operating voltage, current, size, and weight specifications.
Amplifier Section| frequency range | 87.5MHz-108.0MHz |
|---|---|
| preout level/load | 1800mV/10kΩ |
| maximum power | 50W×4 |
| frequency response | 30Hz-15kHz |
| power (DIN45324, +B=14.4V) | 30W×4 |
Tone Section| bass | 100Hz ±10dB |
|---|---|
| middle | 1kHz ±10dB |
| treble | 10kHz ±10dB |
MW (AM) Section| frequency range | 531kHz-1611kHz |
|---|---|
| frequency step | 9kHz |
| usable sensitivity (S/N:20dB) | 25µV |
LW Section| frequency range | 153kHz-281kHz |
|---|---|
| installation size (W) | 182mm |
| usable sensitivity (S/N:20dB) | 45µV |
CD Section| weight | 1.25kg |
|---|---|
| frequency response | 10Hz-20kHz (±1dB) |
| total harmonic distortion | 0.01% (1kHz) |
To Next Page