Why does 'PROTECT' appear on my Kenwood Car Receiver and what to do?
The 'PROTECT' message appears because the terminals of the speaker leads are not properly covered with insulating tape. Ensure the speaker lead terminals are correctly covered with insulating tape, and then reset the unit. If the issue persists, it may require professional attention.
What to do if my Kenwood KDC-MP149 Car Receiver sound cannot be heard?
If you cannot hear any sound from your Kenwood Car Receiver, first, adjust the volume to the optimum level. If the issue persists, check the cords and connections to ensure they are properly connected.
Why is the radio reception poor on my Kenwood KDC-MP149?
Poor radio reception or static noise may occur if the antenna is not connected firmly or fully extended. Ensure the antenna is connected securely and pull it out completely to improve reception.
What to do if my Kenwood KDC-MP149 Car Receiver does not work at all?
If your Kenwood Car Receiver is not working, try resetting the unit.
What does 'ERROR 99' mean on my Kenwood KDC-MP149 Car Receiver and how to fix it?
The “ERROR 99” message indicates a malfunction. Try pressing the reset button on the unit. If the error persists, it may require professional attention.
What does 'NO DISC' mean on my Kenwood KDC-MP149 Car Receiver?
The message 'NO DISC' indicates that there is no disc currently inserted in the loading slot. Insert a playable disc into the loading slot.
What does 'IN' flashing mean on my Kenwood KDC-MP149 Car Receiver?
The flashing “IN” indicates that the CD player is not operating correctly. Try reinserting the disc properly. If the condition does not improve, it may require professional attention.
What does 'TOC ERROR' mean on my Kenwood KDC-MP149 Car Receiver?
The 'TOC ERROR' message appears if the CD is quite dirty, upside-down, or scratched a lot. Ensure the CD is clean and inserted correctly. If the CD is scratched, try another disc.
Why is the disc sound sometimes interrupted on my Kenwood KDC-MP149?
Disc sound may be interrupted while driving on rough roads. Stop playback in such conditions. Alternatively, try changing the disc or checking the cords and connections.
What does 'COPY PRO' mean on my Kenwood KDC-MP149 Car Receiver?
The 'COPY PRO' message indicates that you are trying to play a copy-protected file.
Specifications for the FM tuner, including frequency range and sensitivity.
Specifications for the AM tuner, including frequency range and sensitivity.
Specifications for the MW tuner, including frequency range and sensitivity.
Specifications for the LW tuner, including frequency range and sensitivity.
Technical specifications for the CD player, including laser, filter, and playback capabilities.
Specifications related to the audio output, power, impedance, and tone controls.
Specifications for the auxiliary input, including frequency response and voltage.
General operational parameters like voltage, current, dimensions, and weight.
Instructions on how to safely attach and detach the unit's faceplate.
Steps to perform a system reset to restore factory settings.
Guidance on preparing and using the remote controller (RC-405).
Explanation of the Class 1 laser product marking and safety.
Instructions for cleaning the main unit and its connectors.
Proper procedures for handling and caring for discs.
How the audio system mutes and resumes during phone calls.
Steps to disable the automatic display demonstration mode.
Instructions for enabling or disabling the display demonstration.
Procedure for setting the current time on the unit.
Guide to performing initial setup before using the unit.
How to adjust the frequency tuning increments for FM and MW bands.
Configure station searching to only find strong signals.
Choose between automatic or manual station tuning.
Enable or disable automatic memorization of stations.
Toggle mono reception for improved FM signal quality.
Search for radio stations by program type (e.g., News, Music).
Set the time interval for receiving news bulletins.
Automatically search for alternative frequencies for RDS programs.
Switch to another station in the same region using AF control.
Automatically search for better traffic information reception.
Notes on using the RC-405 remote controller within settings.
Select track, folder, or disc repeat modes.
Enable random playback for discs, folders, or tracks.
Enable scan play for tracks or files to preview music.
Navigate and select specific folders, tracks, or files on a disc.
Search for music tracks directly using the remote controller.
List of disc types and conditions that cannot be used with the unit.
Details on playable audio file formats and disc media.
Adjustments for subwoofer, bass, midrange, treble, balance, and fader.
Configure AUX names, clock sync, display dimmer, and text scroll.
Step-by-step guide for installing the unit in a vehicle.
Important safety precautions and warnings during installation.
Diagrams and instructions for connecting the unit's wiring harness.
Instructions for physically mounting the unit into the car dashboard.
Procedure for safely removing the unit from the dashboard.
General| Power Output | 50W x 4 |
|---|---|
| Tuner | FM/AM |
| CD Playback | Yes |
| MP3 Playback | Yes |
| USB Input | Yes |
| Aux Input | Yes |
| Bluetooth | No |
| Display Type | LCD |
| WMA Playback | Yes |
| CD-R/RW Compatibility | Yes |
| Detachable Faceplate | Yes |
| Remote Control | Yes |
To Next Page