V
Veronica DavisSep 8, 2025
What does '[P-OFF WAIT]' not work on Kenwood Car Receiver?
- EEdward JohnsonSep 8, 2025
To enable '[P-OFF WAIT]' function, exit from the demonstration mode.
To Next PageTo Next PageWhat does '[P-OFF WAIT]' not work on Kenwood Car Receiver?
To enable '[P-OFF WAIT]' function, exit from the demonstration mode.
What does 'NA FILE' mean on my Kenwood Car Receiver?
The “NA FILE” message indicates that the unit is attempting to play an audio file that is not supported.
Why does 'READING' keep flashing on my Kenwood KDC-MP149?
The flashing 'READING' message indicates that a longer readout time is required. Avoid using too many hierarchies and folders on your disc.
General| Power Output | 50W x 4 |
|---|---|
| Tuner | FM/AM |
| CD Playback | Yes |
| MP3 Playback | Yes |
| USB Input | Yes |
| Aux Input | Yes |
| Bluetooth | No |
| Display Type | LCD |
| WMA Playback | Yes |
| CD-R/RW Compatibility | Yes |
| Detachable Faceplate | Yes |
| Remote Control | Yes |
Specifications for the FM tuner, including frequency range and sensitivity.
Specifications for the AM tuner, including frequency range and sensitivity.
Specifications for the MW tuner, including frequency range and sensitivity.
Specifications for the LW tuner, including frequency range and sensitivity.
Technical specifications for the CD player, including laser, filter, and playback capabilities.
Specifications related to the audio output, power, impedance, and tone controls.
Specifications for the auxiliary input, including frequency response and voltage.
General operational parameters like voltage, current, dimensions, and weight.
Instructions on how to safely attach and detach the unit's faceplate.
Steps to perform a system reset to restore factory settings.
Guidance on preparing and using the remote controller (RC-405).
Explanation of the Class 1 laser product marking and safety.
Instructions for cleaning the main unit and its connectors.
Proper procedures for handling and caring for discs.
How the audio system mutes and resumes during phone calls.
Steps to disable the automatic display demonstration mode.
Instructions for enabling or disabling the display demonstration.
Procedure for setting the current time on the unit.
Guide to performing initial setup before using the unit.
How to adjust the frequency tuning increments for FM and MW bands.
Configure station searching to only find strong signals.
Choose between automatic or manual station tuning.
Enable or disable automatic memorization of stations.
Toggle mono reception for improved FM signal quality.
Search for radio stations by program type (e.g., News, Music).
Set the time interval for receiving news bulletins.
Automatically search for alternative frequencies for RDS programs.
Switch to another station in the same region using AF control.
Automatically search for better traffic information reception.
Notes on using the RC-405 remote controller within settings.
Select track, folder, or disc repeat modes.
Enable random playback for discs, folders, or tracks.
Enable scan play for tracks or files to preview music.
Navigate and select specific folders, tracks, or files on a disc.
Search for music tracks directly using the remote controller.
List of disc types and conditions that cannot be used with the unit.
Details on playable audio file formats and disc media.
Adjustments for subwoofer, bass, midrange, treble, balance, and fader.
Configure AUX names, clock sync, display dimmer, and text scroll.
Step-by-step guide for installing the unit in a vehicle.
Important safety precautions and warnings during installation.
Diagrams and instructions for connecting the unit's wiring harness.
Instructions for physically mounting the unit into the car dashboard.
Procedure for safely removing the unit from the dashboard.
