Kenwood KDC-MP249 User Manual

KDC-MP249
KDC-MP2049
KDC-MP149
KDC-3051M
KDC-315M
CD-RECEIVER
INSTRUCTION MANUAL
This symbol mark indicates that
Kenwood manufactured this
product so as to decrease harmful
influence on the environment.
GET0672-001A (MW/M2W/M0/M20)© 2010 Kenwood Corporation All Rights Reserved.
FM tuner section
KDC-MP249/ KDC-MP2049/ KDC-MP149 only:
Frequency range:
200 kHz space: 87.9 MHz — 107.9 MHz
50 kHz space: 87.5 MHz — 108.0 MHz
Usable sensitivity (S/N= 26 dB): 11.2 dBf (1.0 μV/75 Ω)
Quieting sensitivity (DIN S/N = 46 dB):
19.2 dBf (2.5 μV/75 Ω)
KDC-3051M/ KDC-315M only:
Frequency range (50 kHz space):
87.5 MHz — 108.0 MHz
Usable sensitivity (S/N = 26 dB): 1.0 μV/75 Ω
Quieting sensitivity (DIN S/N = 46 dB): 2.5 μV/75 Ω
Frequency response (±3 dB): 30 Hz — 15 kHz
Signal-to-Noise ratio (MONO): 63 dB
Stereo separation (1 kHz): 40 dB
AM tuner section
KDC-MP249/ KDC-MP2049/ KDC-MP149 only:
Frequency range:
Band 1 (MW):
10 kHz space: 530 kHz — 1 700 kHz
9 kHz space: 531 kHz — 1 611 kHz
Band 2 (SW1):
5 kHz space: 2 940 kHz — 7 735 kHz
Band 3 (SW2):
5 kHz space: 9 500 kHz — 10 135 kHz /
11 580 kHz — 18 135 kHz
Usable sensitivity (S/N= 20 dB):
MW: 31 dBμ (36 μV) / SW: 32 dBμ (40 μV)
MW tuner section
KDC-3051M/ KDC-315M only:
Frequency range (9
kHz space): 531 kHz — 1 611 kHz
Usable sensitivity (S/N = 20 dB): 36 μV
LW tuner section
KDC-3051M/ KDC-315M only:
Frequency range:
153 kHz — 279 kHz
Usable sensitivity (S/N = 20 dB): 57 μV
CD player section
Laser diode: GaAIAs
Digital filter (D/A): 8 Times Over Sampling
D/A converter: 24 Bit
Spindle speed: 500 rpm — 200 rpm (CLV)
Wow & Flutter: Below Measurable Limit
Frequency response (±1 dB): 20 Hz — 20 kHz
Total harmonic distortion (1 kHz): 0.01 %
Signal-to-Noise ratio (1 kHz): 105 dB
Dynamic range: 90 dB
MP3 decode: Compliant with MPEG-1/2 Audio Layer-3
WMA decode: Compliant with Windows Media Audio
Audio section
Maximum output power: 50 W × 4
KDC-MP249/ KDC-MP2049/ KDC-MP149 only:
Full bandwidth power (at less than 1 % THD): 22 W × 4
KDC-3051M/ KDC-315M only:
Output power (DIN 45324, +B = 14.4 V):
30 W × 4
Speaker impedance: 4 Ω — 8 Ω
Tone action: Bass: 100 Hz ±8 dB
Middle: 1 kHz ±8 dB
Treble: 10 kHz ±8 dB
Preout level / load (CD): 2 000 mV/10 kΩ
Preout impedance: ≤ 600 Ω
Auxiliary input section
Frequency response (±3 dB): 20 Hz — 20 kHz
Input maximum voltage: 1 200 mV
Input impedance: 10 kΩ
General
Operating voltage (11 V — 16 V allowable): 14.4 V
Maximum current consumption: 10 A
Installation size (W × H × D): 182 mm × 53 mm × 158 mm
Weight: 1.3 kg
Specifications
16
Subject to change without notice.
Declaration of Conformity with regard to the EMC Directive 2004/108/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative’s:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
CoverRear_KDC-MP249[M]f.indd 1-2CoverRear_KDC-MP249[M]f.indd 1-2 8/11/10 5:49:16 PM8/11/10 5:49:16 PM

Kenwood KDC-MP249 Specifications

General

Brand	Kenwood
Model	KDC-MP249
Category	Car Receiver
Language	English

Summary

Specifications

FM Tuner Section

Technical specifications for FM reception.

AM Tuner Section

Technical specifications for AM reception.

MW Tuner Section

Technical specifications for MW reception.

LW Tuner Section

Technical specifications for LW reception.

CD Player Section

Technical specifications for CD playback.

Audio Section

Technical specifications for audio output and processing.

Auxiliary Input Section

Technical specifications for auxiliary audio input.

General Specifications

General technical specifications including voltage and weight.

Preparation

Faceplate Installation and Removal

Steps for attaching and detaching the unit's faceplate.

Unit Reset Procedure

How to reset the unit to its default settings.

Laser Product Marking

Explanation of the Class 1 laser product designation.

Remote Controller Setup

Preparing the remote control for first-time use and battery replacement.

Basic Operations

Remote Sensor

Location and handling of the remote control sensor.

Maintenance

Guidelines for cleaning the unit and connectors.

Handling Discs

Proper procedures for handling and inserting discs.

Muting Upon Phone Call Reception

Getting Started

Canceling Display Demonstration

How to turn off the automatic display demonstration mode.

Setting Demonstration Mode

How to enable or disable the display demonstration.

Adjusting the Clock

Step-by-step guide to setting the unit's clock.

Initial Settings

Configuring initial setup options before using the unit.

Listening to the Radio

Changing Frequency Steps

How to adjust FM/MW frequency steps for specific models.

Adjust [SETTINGS] Mode Settings

Local Seek

Setting local seek function for station tuning.

Seek Mode

Selecting the station search mode (AUTO/MANUAL).

Auto Memory

Enabling automatic memorization of stations.

Mono Set

Adjusting mono setting for FM reception.

PTY Search

Searching for stations based on program type.

News Set

Setting time for receiving news bulletins.

AF Set

Automatically searching for alternative frequencies.

RDS Region

Switching regions for RDS services.

ATP Seek

Searching for stations with better traffic information reception.

Listening to a Disc

Selecting Repeat Play

Options for repeating tracks, folders, or discs.

Selecting Random Play

Options for random playback of discs or folders.

Selecting Scan Play

Activating scan play for track or file previews.

Selecting a Folder/Track/File

Navigating and selecting music files on a disc.

Listening to Other External Components

Function Settings

Sub-Woofer Level

Adjusts the subwoofer output level.

Bass Boost

Selects preferred bass boost level.

System Q

Selects a preset sound mode for music genre.

Bass Adjust

Adjusts bass center frequency and level.

Mid Adjust

Adjusts mid-range center frequency and level.

Treble Adjust

Adjusts treble center frequency and level.

Balance

Adjusts left and right speaker output balance.

Fader

Adjusts front and rear speaker output balance.

Sub-Woofer Set

Turns the subwoofer output on or off.

Detail Set

Configures subwoofer crossover frequencies and phase.

Volume Offset

Sets volume adjustment level for each source.

Troubleshooting

Installation/Connection

Part List

List of components included for installation.

Basic Procedure

Step-by-step guide for installing the unit.

Warning

Important safety precautions during installation.

Caution

Important notes and recommendations for installation.

Wiring Connection

Installing the Unit

Connecting ISO Connectors

Instructions for connecting ISO connectors on certain vehicles.

Installing Without Mounting Sleeve

Procedure for installing on Japanese cars without a mounting sleeve.

Removing the Unit