Do you have a question about the Kenwood KDC-MP339 and is the answer not in the manual?
Tuner | AM/FM |
---|---|
CD Playback | Yes |
MP3 Playback | Yes |
WMA Playback | Yes |
USB Port | Yes |
Bluetooth | No |
Display | LCD |
Equalizer | 3-band |
DIN Size | Single DIN |
Detachable Face | Yes |
Preamp Voltage | 2.5V |
RMS Power Bandwidth | 20Hz - 20kHz |
CD Signal-to-Noise | 90dB |
CD-R Playback | Yes |
CD-RW Playback | Yes |
ID3 Tag | Yes |
Remote Control | Optional |
Built-in Display | Yes |
AAC Playback | No |
Auxiliary Input | Yes |
Preamp Outputs | 2 |
RMS Power Output | 22 Watts x 4 Channels |
Peak Output | 50W x 4 |
CD Frequency Response | 10Hz - 20kHz |
AM/FM Presets | 18 FM / 6 AM |
Type | Car Receiver |
Provides a visual representation of the unit's components and their assembly.
Procedures for entering, clearing, and understanding default conditions of the test mode.
Covers special displays, CD operations, and tuner functions like K3I switching.
Details adjustment modes, ROM transfer, and other data handling.
Procedures for entering, clearing, and understanding default conditions of the test mode.
Covers special displays, CD operations, and tuner functions like K3I switching.
Details adjustment modes, RDS measurement, and data transfer processes.
Details operation procedures and the types of data to be copied during transfer.
Provides a list of component references and their corresponding addresses on the PC board.
Lists components categorized by destination (K, M, E) for the electric unit.