To Next PageTo Next PageWhy does “LOADING” appear on my Kenwood Car Receiver when I enter search mode?
If “LOADING” appears when you enter search mode on your Kenwood Car Receiver, the unit is still preparing the iPod/iPhone music list. It may take some time to load, try again later.
What to do if my Kenwood Car Receiver says “MISWIRING CHECK WIRING THEN PWR ON”?
If your Kenwood Car Receiver displays “MISWIRING CHECK WIRING THEN PWR ON”, turn the power off. Check to ensure the terminals of the speaker wires are properly insulated, then turn the power back on.
What to do if there is no sound from my Kenwood Car Receiver?
If you cannot hear sound from your Kenwood Car Receiver: * Adjust the volume to the optimum level. * Check the cords and connections.
Why is sound being interrupted during playback of a Bluetooth audio player on my Kenwood Car Receiver?
If the sound is interrupted or skipped during playback of a Bluetooth audio player on your Kenwood Car Receiver: * Reduce the distance between the unit and the Bluetooth audio player. * Turn off, then turn on the unit and try to connect again. * Consider that other Bluetooth devices might be trying to connect to the unit.
What to do if my Kenwood Car Receiver is showing “PLEASE EJECT”?
If your Kenwood Car Receiver displays “PLEASE EJECT”, reset the unit. If the problem persists, consult your nearest service center.
How to improve poor phone sound quality on my Kenwood Car Receiver?
If the phone sound quality is poor on your Kenwood Car Receiver: * Reduce the distance between the unit and the Bluetooth device. * Move the car to a place where you can get a better signal reception.
What does “ERROR” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “ERROR”, try the operation again. If “ERROR” appears again, check if the device supports the function you have tried.
What does “NO MUSIC” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “NO MUSIC”, connect a USB device that contains playable audio files.
What does “USB HUB IS NOT SUPPORTED” mean on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “USB HUB IS NOT SUPPORTED”, it means that the unit cannot support a USB device connected via a USB hub.
How to fix voice calling issues on Kenwood Car Receiver?
If voice calling method is not successful on your Kenwood Car Receiver: * Use voice calling method in a quieter environment. * Reduce the distance from the microphone when you speak the name. * Make sure the same voice as the registered voice tag is used.
General| Brand | Kenwood |
|---|---|
| Model | KDC-MP368BT |
| Category | Car Receiver |
| Language | English |
Guides through initial setup steps like language selection, clock, and date settings.
Covers playback controls for CD, USB, iPod, and Android devices.
Guides on connecting and using the Pandora application via USB or Bluetooth.
Steps for connecting the SiriusXM tuner, activation, and subscription.
Step-by-step guide for pairing Bluetooth phones and audio devices.
Covers receiving calls, answering, rejecting, and ending calls.
Guides on setting speaker delay times for optimal sound staging.
Solutions for common problems like no sound, unit not turning on, or display errors.
Solutions for disc errors, file playback issues, device connection errors, and iPod errors.
Covers issues like no device detection, pairing failures, poor call quality, and audio interruptions.
Crucial safety warnings and cautions regarding unit installation and wiring.
Step-by-step guide for installing the unit in the vehicle dashboard.
Detailed wiring connections for different models and accessories.
