Kenwood KDC-MP928 User Manual

CD-RECEIVER
KDC-MP928
INSTRUCTION MANUAL
© B64-3149-00/00 (KW)
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your KENWOOD dealer for information or service on the product.
Model KDC-MP928 Serial number
US Residence Only
Register Online
Register your Kenwood product at
www.kenwoodusa.com
B64-3149-00KEnglish.Indd1B64-3149-00KEnglish.Indd1 05.4.111:36:01AM05.4.111:36:01AM

Kenwood KDC-MP928 Specifications

FM Tuner Section

frequency range	87.9 MHz – 107.9 MHz
usable sensitivity	9.3dBf (0.8 µV /75 Ω)
quieting sensitivity	15.2dBf (1.6 µV /75 Ω)

AM Tuner Section

frequency range	530 kHz – 1700 kHz
usable sensitivity	28 dBµ (25 µV)

CD Player Section

spindle speed	1000 – 400 rpm (CLV 2times)
frequency response	10 Hz – 20 kHz
total harmonic distortion	0.008 %

Power

maximum output power	50 W x 4
full bandwidth power	22 W x 4
preout level / load	5000 mV/10 kΩ

Auxiliary Input

frequency response	20 Hz – 20 kHz
input maximum voltage	1200 mV
input impedance	100 kΩ

General

operating voltage	14.4 V
current consumption	10 A
installation size	182 × 50 × 155 mm