Need help?Do you have a question about the Kenwood KDS-P100 and is the answer not in the manual?
General| Type | Digital Signal Processor |
|---|---|
| THD | 0.01% |
| Frequency Response | 20Hz - 20kHz |
| Weight | 1.2 kg |
| Output Level | 4V |
Instructions to prevent fires and personal injury.
Instructions to keep the unit in proper working order.
Information regarding radio frequency energy and modifications.
How to decrease or increase reverberation level using the Audio control.
How to shorten or lengthen delay time using the < and > buttons.
How to select frequency bands using the < and > buttons.
How to decrease or increase levels for selected frequency bands.
Select a position as described on page 10.
Use Audio control to fine-tune listening position, direction shown on display.
Adjust output level (dB) and cut-off frequency (Hz).
Use Audio controller to adjust balance (left/right) and fader (front/rear).
Step-by-step guide for wiring, connecting, and installing the unit.
Warnings about short-circuits, fuses, and unconnected wires.
Addresses issues like no power, no sound, no DSP effect, and memory loss.
To Next Page
