Need help?Do you have a question about the Kenwood KEC-101 and is the answer not in the manual?
Sets the low-pass cut-off frequency to match speaker characteristics.
Adjusts the low output level from MIN to 0 dB based on amplifier/speaker capacity.
Sets the high-pass cut-off frequency according to speaker characteristics.
Adjusts the high output level from MIN to 0 dB based on amplifier/speaker capacity.
Lists the power connection cord and tapping screws included with the unit.
Step-by-step instructions for securely mounting the unit in a vehicle.
General| S/N Ratio | 100dB |
|---|---|
| Signal-to-Noise Ratio | 100 dB |
| Type | Electronic |
| Channels | 2 |
| Output Impedance | 100 Ohms |
To Next Page