Need help?Do you have a question about the Kenwood KEC-600 and is the answer not in the manual?
Safety warnings for fire prevention and personal injury mitigation.
Overview of all controls, connectors, and indicators on the front panel.
Details of input/output jacks, fuse, and terminals on the rear panel.
Disconnect battery negative terminal to prevent short circuits before installation.
Step-by-step guide for connecting leads, installing unit, and reconnecting battery.
Diagram showing connections for inputs, outputs, power, and ground.
Adjustments for FRONT MID and HIGH outputs.
General| Type | Electronic Crossover |
|---|---|
| Slope | 12dB/octave |
| S/N Ratio | 100dB |
| Signal-to-Noise Ratio | 100 dB |
| Channels | 2-way |
| Output Impedance | 1 kOhm |
| Power Supply | 12V DC |
| Total Harmonic Distortion | 0.01% |
To Next Page