Need help?Do you have a question about the Kenwood KFC-W2525DVC and is the answer not in the manual?
Warning about disposing of polyethylene bags to prevent child suffocation hazard.
Instruction to connect speakers to DC 12V, negative ground.
Warning against installing speakers in wet locations.
Warning against installing speakers in dusty or unstable places.
Prohibition against opening or modifying the unit to prevent fire or malfunction.
Guidance on cleaning speakers with a soft, dry cloth, avoiding solvents.
Action to take if smoke or abnormal smell is detected: switch off power.
Advises checking space, keeping wiring away from noise sources and moving parts.
Lists necessary tools like drill, cutter, knife, screwdriver, ruler, eye protection.
Specifies suitable locations like boot or separate enclosures, and unsuitable places.
Instruction to refer to "Mounting locations" for selecting the installation site.
Steps for placing the template and marking hole positions for cutting.
Procedure for cutting the main hole and drilling screw holes.
Instructions for peeling off covering and attaching the spacer to the speaker flange.
Final step to install the unit as shown in the figure.
Diagrams for parallel and series-parallel wiring of KFC-W3085/KFC-W2585.
Diagrams for series, parallel, and series-parallel wiring of KFC-W3025DVC/KFC-W2525DVC.
Recommendation to use a crossover network with an appropriate cut-off frequency.
Caution on setting amplifier sensitivity to match the pre-output volume of audio sources.
To Next Page
General