Need help?Do you have a question about the Kenwood KM-Z1 and is the answer not in the manual?
General| Total harmonic distortion | 0.008% |
|---|---|
| Damping factor | 200 |
| Input sensitivity | 1mV (mic), 2.5mV (MM), 200mV (line) |
| Frequency response | 5Hz - 100kHz |
| Speaker load impedance | 8Ω to 16Ω |
Read this page carefully to ensure safe operation.
Instructions in this manual carefully to get maximum performance.
Unpack your amplifier carefully, and examine it for shipping damage.
Details the front panel buttons and indicators of the amplifier.
Ensures proper ventilation for the high-powered amplifier to prevent overheating.
Explains how to connect the amplifier to the controller and other components.
Details connecting the amplifier to Kenwood components for system operation.
Provides instructions on connecting speakers using various wire types.
Step-by-step guide on preparing speaker wire for connection.
Instructions for inserting banana plugs into speaker connectors.
Diagnoses issues related to lack of audio output from speakers.
Troubleshooting intermittent audio interruptions and signal loss.
Addresses situations where the standby indicator blinks without audio.
Resolves issues where the standby indicator fails to illuminate upon power connection.
Troubleshoots system control functionality issues with the amplifier.
Guidance for resolving issues not covered in the troubleshooting section.
Details the amplifier's power output capabilities according to FTC standards.
Specifies the damping factor of the amplifier for speaker control.
Provides information on the amplifier's harmonic distortion levels.
Indicates the range of audio frequencies the amplifier can reproduce.
States the signal-to-noise ratio performance based on IHF '66 standards.
Specifies input sensitivity and impedance for connected audio sources.
Indicates the electrical power the amplifier consumes during operation.
Provides the physical size specifications (width, height, depth) of the unit.
States the net weight of the amplifier in pounds and kilograms.
To Next Page
