KPG-36X
1. Outline
● This product can be connected to the LMR radios by USB or UART serial connection.
By switching the conversion module of the cable central portion, It is possible to switch between USB and UART.
● At UART serial connection, this product connects at high speed by the stability operation in USB-serial conversion module.
At USB connection, USB signal passes through by the switch.
2. Feature
2.1 Cable
This cable is connected the Radio (LMR) with the USB terminal of the computer.
2.2 Connection
This product can be connected to the LMR radio by USB or UART.
Switching USB to UART/UART to USB is using a SW on Conversion module.
2.3 USB
USB 2.0 Full Speed (12Mb/s) compliant.
2.4 USB driver software
This software works on Microsoft windows Vista(32/64bit)/ 7(32/64bit)/8(32/64bit)/8.1(32/64bit).
This software is supplied with the CD-R.
COPYRIGHT©2015 JVCKENWOOD Corporation No.RQ070
2015/03
The "Product Exchange System" is applicable to this product.
SERVICE MANUAL
USB PROGRAMMING INTERFACE CABLE
To Next Page
Need help?
General
