Kenwood KR-V888D User Manual

1
KR-V888D (En/T)
Preparations
Operations
Remote Control
Other
B60-3017-10 CH (T) WS
98/12 11 10 9 8 7 6 5 4 3 2 1 97/12 11 10 9 8 7 6 5 4 3
AUDIO VIDEO SURROUND RECEIVER
KR-V888D
INSTRUCTION MANUAL
KENWOOD CORPORATION
About the supplied remote control . . .
Compared to standard remote controls, the remote control supplied with this receiver has several
operation modes. These modes enable the remote control to perform on screen operations and control
other audio/video components. In order to effectively use the remote control it is important to read the
operating instructions and obtain a proper understanding of the remote control and how to switch its
operation modes (etc.).
Using the remote control without completely understanding its design and how to switch the operation
modes may result in incorrect operations.

Kenwood KR-V888D Specifications

General

Total Harmonic Distortion (THD)	0.08%
Tuning Range	FM, MW
Input Impedance	47k ohms
Input Sensitivity	200 mV
Speaker Load Impedance	8 ohms
Video Connections	Composite Video
Power Output	100W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)

Summary

Getting started

Before applying the power

Instructions for applying power to the unit, including voltage requirements.

Safety precautions

Guidelines to prevent electric shock and fire hazards.

Unpacking

Steps for carefully unpacking the audio/video receiver and checking for damage.

Special features

True home theater sound

Description of the receiver's various surround sound modes like Dolby Digital and DSP.

Universal IR (InfraRed) remote control

Overview of the remote's ability to control other audio/video components.

Easy surround setup and operation with OSD (On Screen Display)

Explanation of using the OSD for simplified surround setup and operation.

How to use this manual

Names and functions of parts

Setting up the system

Connecting the antennas

Diagram and instructions for connecting FM and AM antennas.

Normal playback

Listening to a source component

Steps to turn on the receiver and select a playback source.

Recording

Recording audio

Instructions for recording music sources from various components.

Recording video

Instructions for recording video sources from various components.

Listening to radio broadcasts

Tuning (non-RDS) radio stations

Guide to tuning into radio stations not using RDS.

Ambience effects

Sound modes

Explanation of different sound modes like Dolby Digital and Pro Logic.

Getting the most from your remote control

Registering setup codes for other components

Procedure for programming the remote to control other audio/video devices.

In case of difficulty

Resetting the Microcomputer

Procedure to reset the receiver's microcomputer in case of malfunction.

Specifications

Remote operation of other components

TV operations

Details on remote control operations for TV.

VCR operations

Details on remote control operations for VCR.

Cable tuner operations

Details on remote control operations for cable tuners.

DVD player operations

Details on remote control operations for DVD players.