Need help?Do you have a question about the Kenwood KR-V8040 and is the answer not in the manual?
General| Power Output | 100 W per channel (8 ohms) |
|---|---|
| Total Harmonic Distortion (THD) | 0.08% |
| Frequency Response | 5 Hz - 100 kHz |
| Signal-to-Noise Ratio | 100 dB |
| Input Sensitivity | 150 mV (line) |
| Dimensions | 17.1 x 14.2 x 5.9 inches |
| Weight | 24.2 lbs |
| Tuning range | FM, MW |
| Video Connections | Composite video in/out |
Covers power requirements and voltage settings for different global regions.
Details on using the voltage selector switch for international compatibility.
Illustrates how to connect audio sources like tape decks and CD players.
Guides on connecting speaker wires to the unit's terminals.
Instructions for setting the impedance selector based on speaker configuration.
Overview of essential keys on the remote control unit for operation.
Step-by-step guide for basic audio playback using the unit.
How to use CD DIRECT playback for optimal sound quality.
Guide to using LINE STRAIGHT playback for direct sound.
Guide to tuning and saving radio stations using preset memory.
Method for directly tuning radio stations by entering frequency.
Steps to fine-tune Dolby PRO LOGIC settings for optimal sound.
Troubleshooting common issues with the remote control.
Solutions for sound output problems with the amplifier and speakers.
Troubleshooting common issues related to radio reception.
To Next Page
