To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KRF-V5450D and is the answer not in the manual?
General| Type | AV Receiver |
|---|---|
| Channels | 5.1 |
| Total Harmonic Distortion (THD) | 0.08% |
| Input Sensitivity | 200 mV |
| Tuner | AM/FM |
| Surround Sound Formats | Dolby Digital, DTS |
| Power Output | 100 W |
| Frequency Response | 10 Hz - 50 kHz |
| Frequency Response (alternative) | 20Hz-20kHz (±0.5dB) |
| Signal-to-Noise Ratio | 98dB |
| Signal-to-Noise Ratio (alternative) | 98 dB |
| Digital inputs/outputs | 2 x Optical, 2 x Coaxial |
| Input Sensitivity/Impedance | 200 mV/47 kΩ |
| Speaker Impedance | 4-16 ohms |
Unpack the unit carefully and make sure that all the accessories are present.
Guidance on recycling old electrical and electronic equipment and batteries.
Instructions for cleaning the unit's exterior.
Advice against using contact cleaners due to potential malfunction.
Instructions for mounting the product to a wall or ceiling.
Advice on positioning the product away from heat sources.
Warnings regarding outdoor antenna placement near power lines.
Guidance on grounding an outside antenna system.
Enables transfer of HDTV video and high-quality audio via HDMI.
Reproduces music with high fidelity by turning off display and analog video circuitry.
Incorporates various surround modes for an enhanced video experience.
Detailed settings for optimizing receiver performance in your listening room.
Instructions on selecting sources and starting playback.
Details on the front panel controls and indicators of the main unit.
Details on the buttons and functions of the remote control.
Instructions for operating the unit and loading remote control batteries.
Detailed explanation of the front panel display indicators.
Important precautions and guidelines before making connections.
Recommendations for optimal placement of speakers.
Explanation of HDMI setup and signal flow for video and audio.
How to connect portable devices to the front panel AV AUX jacks.
Guidelines for selecting the appropriate room size for setup.
Visual guide for selecting the correct listening position.
Select the use and size for each speaker.
Outline of the 6 elements involved in detailed speaker setup.
Measure and set the distance from each speaker to the listening position.
Adjusts the bass tone effect level for Dolby Digital and DTS signals.
Delays audio output timing to synchronize with video.
Selects the destination for audio output (TV or unit).
Enables interlocking of volume and input selection with components.
Interlocks unit's power status with connected components.
Guides on setting the input mode for digital or analog sources.
Outputs sound directly without any sound field effect.
Explanation of the unit's display indicators for listen modes and signals.
Displays the type and number of channels of the audio signal input.
Automatically stores up to 40 RDS stations in preset memory.
How to recall stored radio stations using numeric keys.
Automatically searches for stations broadcasting specific program types.
Enhances bass sound when playing PCM or analog signals.
Selects optimal acoustic field effect based on playback purpose.
Adjusts bass (low frequencies) and treble (high frequencies) levels.
Fine-adjusts output level for each speaker channel.
Adjusts analog source input level to prevent clipping.
Compresses dynamic range for night listening at low volumes.
Expands front channel acoustic field for sound expansion.
Distributes center channel audio to front speakers for wider sound.
Instructions for using headphones and disabling speakers.
Selects the brightness level for the display and indicators.
How to temporarily mute the audio output.
Troubleshooting common audio issues like no sound or soft sound.
Troubleshooting issues related to radio reception and interference.
Resolving problems with the remote control's operation.
Procedure to reset the unit to factory default settings.
Definitions for Dolby Digital, Pro Logic, DTS formats.
Definitions for PCM, DSP, HDMI, Deep Color, x.v.Color, Lip Sync.
Detailed power output, frequency response, and distortion specifications.
Specifications for video formats and input/output levels.
Details on HDMI input and output terminals.
Tuning frequency range for FM broadcasts.
Tuning frequency range for AM broadcasts.
General specifications including power consumption, dimensions, and weight.
