To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KRF-V6400D and is the answer not in the manual?
General| Frequency range | 10 - 100000 Hz |
|---|---|
| Audio output channels | 6.1 channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Audio system | DTS Digital Surround, DTS 96/24, DTS-ES, DTS Neo, Dolby Digital EX, Dolby Digital, Dolby Pro Logic IIx, Dolby Pro Logic |
| Output power | 130 W |
| Dimensions (WxDxH) | 440 x 372 x 159 mm |
| Power requirements | 220 — 230 V, 50/60 Hz |
| HDMI ports quantity | 3 |
| AM band range | 531 - 1602 kHz |
| FM band range | 87.5 - 108 MHz |
| Radio Data System (RDS) | Yes |
| Connectivity technology | Wired |
| Headphone outputs | 1 |
| Digital audio optical out | 0 |
| Product color | Black |
| Power consumption (typical) | 240 W |
Weight and Dimensions| Weight | 9500 g |
|---|
Read this page carefully to ensure safe operation.
Covers cleaning, water exposure, power, ventilation, and electrical hazards.
HDMI repeater, Pure Audio Mode for enhanced music playback.
True home theater sound modes and easy speaker setup options.
Guidance for optimal placement of front, center, surround, and subwoofer speakers.
Steps for connecting devices via HDMI for high-quality audio/video.
Methods for connecting a TV using HDMI or analog video/audio.
Steps to connect DVD player audio and video lines.
Diagrams and instructions for connecting various speakers and subwoofer.
Steps for powering the unit on and entering standby mode.
Simple setup based on room size and listening position.
Configuration options for speaker use, size, and connection status.
Adjusting speaker output levels, distances, and crossover frequencies.
Configuring low-frequency effects and audio-video timing.
References for speaker size and adjusting individual speaker volume levels.
Measuring and setting speaker distances for accurate sound.
Tuning crossover frequencies and low-frequency effect levels.
Overview of HDMI setup for component connection and control.
Enhancing music playback by disabling display and video circuits.
Enhancing bass and selecting acoustic field effects for music/movies/games.
Fine-tuning individual speaker output and analog input levels.
Adjusting dynamic range, sound expansion, and acoustic field positioning.
Resolving issues related to no sound, low volume, or speaker connection.
Troubleshooting Dolby Digital/DTS format issues and DVD playback problems.
Troubleshooting remote control operation and battery issues.
Procedure for resetting the unit if problems persist.
Technical data for audio output, video formats, and HDMI.
