Kenwood KRF-V6050D User Manual

KENWOOD
AUDIO VIDEO SURROUND RECEIVER
VR-506
VR-505
VR-517
KRF46050D
KRF45050D
KRF-V5550D
-
INSTRUCTION MANUAL
KENWOOD CORPORATION
$Jg
:a
‘b > q
This instruction manual is used to describe multiple models listed above
Model availability and features (functions) may differ depending on the country and
sales area
About the supplied remote control
Compared to standard remote controls, the remote control supplied with this receiver has several operation
modes These modes enable the remote control to control other audio/video components In order to
effectively use the remote control it is important to read the operating instructions and obtain a proper
understanding of the remote control and how to switch its operation modes (etc )
Using the remote control without completely understanding its design and how to switch the operation modes
may result in incorrect operations
B60-4942-00 OOa(K, P, Y, M, X, I) /F-k-; 0009

Kenwood KRF-V6050D Specifications

General

Type	AV Receiver
Channels	5.1
Power Output	100 W per channel
Impedance (Power Output)	8 ohms
Input Sensitivity	200 mV
Signal-to-Noise Ratio	100 dB
Tuner	FM/AM
Surround Sound Formats	Dolby Digital, DTS
Input Impedance	47 k ohms
Speaker Impedance	4 - 16 ohms
Total Harmonic Distortion (THD)	0.08%
Digital Inputs	Optical

Summary

Preparations

Before Applying the Power

Essential pre-operation steps including unpacking, safety, and maintenance.

How to Use This Manual

Guide to understanding the manual's structure and content organization.

Special Features Overview

Highlights key technologies like Dolby Pro Logic, Dolby Digital, and DTS surround.

Names and Functions of Parts

Identifies and explains the receiver's front panel controls and indicators.

Setting Up the System

Instructions for connecting components, speakers, antennas, and system control.

Preparing for Surround Sound

Configuration steps for speaker settings to optimize surround sound playback.

Operations

Normal Playback

Procedures for selecting sources, starting playback, and adjusting volume.

Listening to Source Components

How to select and listen to various connected audio and video sources.

Sound Adjustment

Adjusting tone controls, bass boost, and speaker levels for optimal audio.

Recording Procedures

Guidance on recording audio from analog/digital sources and managing tapes/MDs.

Listening to Radio Broadcasts

Steps for tuning stations, setting presets, and receiving broadcasts.

Ambience Effects and Surround Modes

Explains surround modes like DTS, Dolby Digital, and Dolby Pro Logic.

DVD 6-Channel Playback

How to enjoy multi-channel audio from DVD players.

Remote Control Operations

Registering Setup Codes

Process for programming the remote to control other brand components.

Operating Other Components

How to use the remote to control connected audio/video devices.

Setup Code Chart

A table listing manufacturer codes for various component types.

Remote Key Functions Overview

Explains remote control key operations for components like DVD, CD, VCR.

Additional Information

In Case of Difficulty

Troubleshooting common issues with the amplifier, tuner, and microcomputer.

Remote Control Troubleshooting

Solutions for problems related to remote operation and input selection.

Specifications

Technical details of the receiver's audio, digital, video, and tuner sections.

Important Safeguards

General Safety Precautions

Critical warnings regarding ventilation, water, temperature, heat, and handling.

Electrical Safety Measures

Safety guidelines for power lines, AC outlets, overloading, lightning, and attachments.

Servicing and Replacement Parts

Information on qualified servicing, replacement parts, and safety checks.