Need help?Do you have a question about the Kenwood KT-59 and is the answer not in the manual?
Record serial number for service and warranty information.
Carefully unpack the unit, check for shipping damage, and retain packing materials.
Lists included accessories such as antennas, AC adapter, and audio cord.
Specifies voltage requirements and selector switch for different regions.
How to set the AC voltage selector switch to match local line voltage.
Warnings about fire/shock hazards, rain, moisture, and opening the unit.
Proper power source connection and power cord routing to prevent damage.
Ensure grounding/polarization is not defeated and unit has adequate ventilation.
Keep unit away from water, heat; operate within temperature limits.
Avoid electric shock by not opening enclosure or inserting objects.
Keep unit away from magnetic fields; clean with a dry cloth.
Move appliances on carts with care to prevent overturning.
Unplug during nonuse; handle abnormal smell by powering off and contacting dealer.
Conditions requiring service; user should not attempt unauthorized repairs.
Ground outdoor antennas and keep them away from power lines.
Do not overload AC outlets; check capacity limits.
Make connections as shown, refer to component manuals, do not plug in power until complete.
Connect to amplifier/receiver for system operation like remote control.
Connect coaxial cable to FM terminals and indoor antenna to rear panel terminals.
Adjust switch for correct FM broadcast reception based on region.
Details on AC outlet shapes and voltage selector settings for different units.
Install AM loop antenna on holder or rack; rotate for best reception.
Install FM outdoor antenna for high quality reception using coaxial cable.
Connect T-shaped antenna for strong FM areas; outdoor is recommended for interference.
Install outside longwire antenna in steel buildings or far from transmitter.
Tips for positioning FM outdoor antennas to minimize noise and interference.
Identifies keys like POWER, MEMORY, P.SCAN, TUNING, and numeric keys.
Describes display elements like frequency, preset channels, and indicators.
Explains standby mode where power supports memory function.
Steps to power on, select band, tune stations, and adjust volume.
How to perform auto tuning and manual tuning for broadcasting stations.
Procedure to tune to a station and save it using numeric keys.
One-touch operation to recall a preset station using channel group and numeric keys.
Sequence reception of preset stations using the P.SCAN key.
Unit automatically tunes to the last received station upon power on.
Lists common symptoms, their causes, and remedies for troubleshooting.
Notes on microcomputer interference and caution against using contact cleaners.
Details tuning range, sensitivity, distortion, S/N ratio, separation, and frequency response.
Details tuning range, sensitivity, S/N ratio, distortion, and output level.
Covers power consumption, dimensions, and net weight of the unit.
General| Brand | Kenwood |
|---|---|
| Model | KT-59 |
| Category | Synthesizer |
| Language | English |
To Next Page