EasyManua.ls Logo

Kenwood KVC50 Chef - User Manual

Kenwood KVC50 Chef
215 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TYPE KVC50 (Chef)
TYPE KVL60 (Chef XL)
instructions

Questions and Answers

  • R
    Robert BallAug 12, 2025
    What to do if my Kenwood Kitchen Appliance stops and the standby light flashes rapidly?
    • E
      Ebony ReedAug 12, 2025
      If your Kenwood Kitchen Appliance stops during operation and the standby light flashes rapidly, it indicates that the overload protection or overheat system has been activated, or the maximum capacity has been exceeded. Unplug the appliance and check for any obstruction or overloading. Turn the speed control to “O” and then restart it. If the machine doesn't operate, remove some ingredients to reduce the load and try restarting again. If the problem persists, unplug the appliance and let it stand for 15 minutes, then plug it back in and reselect the speed. If it still doesn't restart, no answer.
  • G
    Garrett SullivanAug 18, 2025
    Why is the standby light flashing on my Kenwood Kitchen Appliance when I first plug it in?
    • F
      francesvazquezAug 18, 2025
      If the standby light is flashing when you first plug in your Kenwood Kitchen Appliance, it means that the speed control is not in the ‘O’ position, or the mixer head is in the raised position or not locked down correctly. Check that the speed control is in the ‘O’ position and ensure the Kitchen Appliance head is locked down correctly.
  • B
    Brittany BrownAug 26, 2025
    What to do if the standby light is off on my Kenwood Kitchen Appliance?
    • A
      Ashley BakerAug 26, 2025
      If the standby light is off while your Kenwood Kitchen Appliance is plugged in, it means that the machine has been left plugged in for more than 20 minutes without being operated and has entered Standby mode. Press the Standby button once to reset it.
  • S
    Stephanie McneilSep 3, 2025
    Why can't I fit my slow speed attachment to my Kenwood Kitchen Appliances?
    • R
      ryangardnerSep 3, 2025
      Attachment must have the KAX twist connection system to fit the outlet. If you own attachments featuring the Bar Connection System you will need to use the KAT002ME adaptor supplied to connect these to the Twist Connection System on your Kitchen Machine. For more information visit www.kenwoodworld.com/twist

Kenwood KVC50 Chef Specifications

General IconGeneral
Power1000W
Speed SettingsVariable
AttachmentsK-beater, Whisk, Dough Hook
CategoryKitchen Appliances
Electronic Speed ControlYes
Planetary Mixing ActionYes
Pulse FunctionYes
Safety InterlockYes
Voltage220-240V
Frequency50/60Hz
Bowl Capacity4.6L
Dimensions30 x 38 x 28.5 cm

Related product manuals