To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KVT-524DVD and is the answer not in the manual?
General| Touchscreen | Yes |
|---|---|
| Motorized | Yes |
| DVD Playback | Yes |
| Bluetooth | Yes |
| USB Input | Yes |
| Number of Channels | 4 |
| Preamp Voltage | 4V |
| Built-in Amplifier | Yes |
| Display Type | TFT LCD |
| Peak Output | 50 watts x 4 |
| Compatible Audio Formats | MP3, WMA, AAC |
| Compatible Video Formats | DivX, MPEG1, MPEG2 |
| iPod Control | Yes |
| Steering Wheel Control Compatibility | Yes |
Displays the control screen and uses various functions.
Configures speaker network and other audio settings.
Configures settings for DVD playback.
Selects languages for speech and menus.
Sets a parental level for content restrictions.
Configures system parameters like beep and remote control.
Configures audio and visual interface parameters.
Sets up user interface parameters like background and display.
Registers and selects Bluetooth units.
Memorizes and recalls Audio/AV Interface settings.
Displays menu to set sound effect functions.
Adjusts front/rear and right/left audio balance.
Sets up the equalizer for sound adjustment.
Sets up the tone curve for sound adjustment.
Sets front and rear audio sources separately.
Covers general issues like touch sensor tone not sounding.
Addresses issues with poor radio reception.
Troubleshoots problems with disc playback.
Addresses sound skipping during audio file playback.
Troubleshoots issues with touch panel control for navigation.
General error message indicating incorrect operation.
Error when source is selected but device is not connected.
Error related to USB device current capacity or connection.
Error indicating failed connection to iPod.
Error when iPod software is outdated.
