To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KVT-532DVD and is the answer not in the manual?
General| Resolution | 800 x 480 pixels |
|---|---|
| DVD Playback | Yes |
| Bluetooth | Yes |
| USB Input | Yes |
| Audio Output Power | 50 watts x 4 channels |
| Preamp Outputs | 3 Pairs (Front, Rear, Subwoofer) |
| Touchscreen | Yes |
| iPod Control | Yes |
| Preamp Voltage | 4 volts |
| CD Player | Yes |
| AM/FM Tuner | Yes |
| GPS Navigation | No |
| Rear View Camera Input | Yes |
| Steering Wheel Control | Yes |
| Equalizer | 13-band |
| RMS Power Output | 22 watts |
| Peak Output | 50 watts |
Configures audio, DVD playback, and system language settings for the receiver.
Manages system parameters, monitor display, clock, and security code settings.
Configures iPod, Sirius satellite radio, and Bluetooth device settings for connectivity.
Accesses the audio menu for sound effects and adjusts audio balance settings.
Installs batteries and explains function differences based on the remote's mode switch.
Explains how to interpret manual illustrations and operation descriptions for clarity.
Sets the station selection mode for radio tuning to find better reception.
Stores the currently tuned radio station into memory presets for quick access.
Warnings to prevent injury or fire during unit installation and operation.
Guidelines for proper disc handling, cleaning, and care to ensure playback.
Instructions for cleaning the unit, handling lens fogging, and performing a reset.
Lists compatible navigation units, iPod models, and Bluetooth devices for connection.
Notes on Satellite Radio, HD Radio compatibility and supported disc types.
Lists playable audio file types (AAC, MP3, WMA) and supported media formats.
Details playable video/picture formats and guidelines for using USB devices.
Explains DVD region codes and various disc identification marks for playback.
Details operational regulatory marks and discs with a limited period of use.
Step-by-step guide on how to open and close the unit's monitor panel.
Buttons for playback, track, scene, file, and folder selection during media playback.
Functions for band switching, seek mode, loudness, volume, and power ON/OFF.
Steps for connecting, playing, and safely removing USB devices to prevent data damage.
How to navigate and select audio/video sources on the unit's screen.
Buttons to access screen setup, switch to Hands-Free, or display the Navigation system.
Describes the order of switching between Navigation and Video/Picture playback screens.
How to use the navigation system screen and set its functions.
Managing other audio/video sources while the navigation system is active.
Controls for iPod/USB media search and Bluetooth audio playback.
Station tuning, band switching, seek mode for radio and satellite radio.
Functions available during the playback screen for DVD and VCD media.
Basic operation buttons and access to source control screen for DVD/VCD.
Controls for accessing the DVD menu, selecting options, and navigating highlight.
Selecting chapters, titles, subtitle, and voice language during DVD playback.
Displays an enlarged VCD screen with zoom and scroll functionality.
Accessing controls and identifying CD playback elements like track number and time.
Controls for repeat, scan, random play, and managing time display for CDs.
Basic functions and display elements for video/picture file playback.
Basic operation buttons and access to source control screen for video/picture files.
Displays file information and allows adjustments like reversing or rotating the picture.
Identifies radio display elements and covers band switching and station tuning.
Explains auto memory, seek mode, and program type search functionalities.
Sets station selection modes and displays a list of memorized radio stations.
Procedures for automatically or manually storing radio stations in memory.
Displays radio text information and allows assigning custom names to stations.
Automatic switching to traffic bulletins and tuning by program type.
Steps for connecting an iPod to the unit using the KCA-iP300V accessory.
Accessing controls and understanding playback modes for iPod content.
Navigating through iPod categories and playing music titles.
Basic operations for selecting files and playing content from USB devices.
Displays file info, track numbers, play modes, and navigation through folders/categories.
Searches folders and audio files stored in the USB device by hierarchy.
Accesses satellite radio controls and performs station tuning and band switching.
Utilizes seek mode, channel scan, and memory functions for satellite radio.
Procedures for searching channels by category and storing them in memory.
Tunes into a channel by directly entering the desired channel number.
Accesses the control screen for Bluetooth audio playback functions.
System pauses and mutes audio automatically when a phone call is received.
Explains cursor movement, character input, layout selection, and space entry.
Accesses the Easy Control Panel and the main Screen Control screen.
Shows the control screen with status indicators and available function buttons.
How to answer, switch, or disconnect an incoming phone call.
Makes calls by entering numbers or using quick dial presets.
Calls contacts from the phonebook using initial search or number search.
Phonebook search using Cyrillic characters and selecting contacts to call.
Makes calls by selecting numbers from the outgoing or incoming call lists.
Initiates calls by recognizing registered voice or keywords for hands-free operation.
Configures auto-response, ringing tone, SMS function, and preset phone numbers.
Registers voice for phonebook recognition by speaking into the microphone.
Registers voice to select phone number categories via voice recognition.
Displays preset numbers and registers them from call lists or phonebook.
Selects message lists, displays messages, and scrolls through text.
Keyboard operations for composing and sending text messages.
How to navigate the setup menu and select specific configuration categories.
Sets crossover frequency for speakers and configures DVD playback language.
Sets DVD angle mark, screen mode, parental lock, and DVD language options.
Enters and confirms parental level code, then selects the desired parental level.
Configures system parameters like key touch tone, scrolling, remote signal, and disc playback.
Sets and registers favorite colors for illumination by adjusting RGB values.
Configures input names, image display, navigation connection, and AV output source.
Selects speakers for navigation voice guidance and configures AV output.
Configures on-screen display for various sources and manages background images.
Displays setup screen and registers sources to favorite select screen buttons.
Loads custom images for the background and deletes existing ones.
Selects background images and calibrates the touch panel for accurate input.
Adjusts the unit's clock time, including synchronization options with navigation or RDS.
Configures monitor opening speed and selects screen modes for various sources.
Steps to set up, register, and re-enter a security code for receiver protection.
Procedures to cancel the security code feature on the receiver system.
Configures iPod playback speed/screen and Sirius parental lock code/function.
Sets a Sirius parental code for accessing locked content on the satellite radio.
Enables/disables parental lock and selects specific channels for restriction.
Sets cell-phone/audio player for Bluetooth and enters PIN code for registration.
Displays connectable devices and searches for Bluetooth units to register.
Sets PIN code and registers special Bluetooth units that may cause pairing errors.
Selects Bluetooth units for connection and removes registered units.
Checks and displays the unit's current software version number.
Locks, memorizes, recalls, or clears audio/AV interface settings.
Navigates the audio control menu and selects specific control items.
Selects various equalizer curve types like Natural, Rock, or User for audio tuning.
Adjusts tone curve, bass, treble, and sets front/rear audio sources.
Notes restrictions like no subwoofer output and unavailable audio/equalizer controls.
Installs batteries and explains functions based on remote mode switch (AUD, DVD, NAVI).
Covers source switching, volume control, monitor open/close, and cursor key usage.
Functions for folder, track, file search, play/pause, stop, and direct search.
Controls for DVD menu, subtitle, zoom, picture angle, audio language, and radio functions.
Functions like Joystick, Enter, Zoom, Menu, Cancel, Position, Route, View, Voice, and Map Dir.
Resolves general issues and problems related to tuner, disc, audio, and navigation sources.
Interprets error codes, protection messages, and USB/iPod device errors.
Guidance for resolving issues related to outdated iPod software versions.
Addresses errors related to tuner connection, antenna, signal, and channel availability.
Details specifications for monitor, USB interface, DVD player, and FM tuner.
Details specifications for AM tuner, video/audio sections, and general unit parameters.
Covers laser product safety compliance and FCC warnings regarding radio frequency energy.
Provides general warnings and specific tips for safe and proper unit installation.
Details connecting power, ground, parking brake, dimmer, and remote control wires.
Shows connections for speaker outputs, reverse signal, AV inputs/outputs, and preouts.
Connects iPods, navigation systems, and satellite/HD radio tuners using accessories.
Secures the unit using mounting strap and screws to prevent malfunction.
Steps to remove the escutcheon frame and detach the main unit.
Mounts brackets using specific holes and warns against incorrect screw usage.
Attaches brackets to the unit sides and secures them by bending case tabs.
Information on updating the product's operating software via the Kenwood website.
Details Kenwood's limited warranty, coverage, exclusions, and service for USA and Australia.
Details Kenwood's warranty, coverage, exclusions, and service for Canada and military markets.
General warranty conditions applicable across Europe and specific country details.
Provides additional warranty information for various European countries.
