Need help?Do you have a question about the Kenwood KX-W8060 and is the answer not in the manual?
Audio Specifications| frequency response (normal tape) | 20 Hz to 18, 000 Hz, +3 dB |
|---|---|
| frequency response (CrOz tape) | 20 Hz to 19, 000 Hz, +3 dB |
| frequency response (metal tape) | 20 Hz to 20, 000 Hz, +3 dB |
| signal-to-noise ratio (Dolby C NR ON) | 72 dB |
| signal-to-noise ratio (Dolby B NR ON) | 65 dB |
| signal-to-noise ratio (Dolby NR OFF) | 57 dB |
| harmonic distortion | Less than 0.6% (at 1kHz, 3rd H.D., Normal tape) |
| wow and flutter (W.R.M.S.) | 0.06% |
| wow and flutter (DIN) | 0.18% |
Power and Dimensions| power consumption | 35 W |
|---|---|
| dimension (width) | 440 mm (17-5/16") |
| dimension (height) | 137 mm (5-3/8") |
| dimension (depth) | 269 mm (10-9/16") |
| weight (net) | 4.9 kg (10.8 lb) |
Input and Output| input sensitivity/impedance (LINE IN) | 77.5 mV/50 kΩ |
|---|---|
| output level/impedance (LINE OUT) | 390 mV/1.9 kΩ |
| output level/impedance (headphones) | 0.2 mW/8 Ω |
To Next Page
